QuikSpins? Worth the $$$?
#1
Thread Starter
Join Date: Jul 2004
Location: North Ogden, Utah
Posts: 96

I saw a post previously posted with a review from a personal test on the new QuikSpins by NAP. I was excited to even see a 1" difference on groups. IMO that is worth the $$$, but I'm still hesitant to go throw some on because the distance was only 25 yds, etc. I'm curious if anyone has any personal tests or experience with greater distances? I'm looking to improve my groups at 40 yards so I can shoot at that range without hesitation knowing I can make a good shot, etc.
#2
Join Date: Feb 2003
Location: Illinois
Posts: 1,862

If "groups" are tight but impact is just 1" out, you simply adjust your sights. No vane or feather is going to correct a bad shot or realign the path of an arrow that has been shot with an incorrect sight setting.
I would like to see a test between the QuikSpins and feather fletching. In addition; if in fact the QuickSpin vanes do spin a shaft 300% more than what is common, I wonder how much penetration energy is shed off when the broadhead strikes the game. I would also suspect that there has to be a (flight) noise increase.
However, it is your money.
I would like to see a test between the QuikSpins and feather fletching. In addition; if in fact the QuickSpin vanes do spin a shaft 300% more than what is common, I wonder how much penetration energy is shed off when the broadhead strikes the game. I would also suspect that there has to be a (flight) noise increase.
However, it is your money.
#3

Hey if ya want to try it go ahead ,I've been thinking of trying them myself just to see what the difference is ,if any but I'm the type to try anything once and if IO like I buy more .
nubo
nubo
#4
Nontypical Buck
Join Date: Feb 2003
Location: Vinton VA
Posts: 2,978
#8
Join Date: Feb 2003
Location: Illinois
Posts: 1,862

I did not read anything in the test report that indicates that Quikspin vanes can accomplish anymore than what can be accomplished with other types of quality fletching mounted on a well-tuned arrow, to justify the price.
Keep in mind, the Quikspin is a plastic or vinyl-type vane. They will be just as prone to damage as any other plastic vane. However, should any of the vanes be warped or torn, how bad will the arrow flight now be, considering that there is a design feature that causes the shaft to spin harder? Over-rotation of a damaged vane(s) could result in some unusual flight characteristics.
If your arrows have been tuned with the dependency of the tune contingent upon the guidance (rotation) tab that is on each vane, what can happen to your accuracy if one or more of the guidance tabs is damaged while in the field and you do not know it?
Keep in mind, the Quikspin is a plastic or vinyl-type vane. They will be just as prone to damage as any other plastic vane. However, should any of the vanes be warped or torn, how bad will the arrow flight now be, considering that there is a design feature that causes the shaft to spin harder? Over-rotation of a damaged vane(s) could result in some unusual flight characteristics.
If your arrows have been tuned with the dependency of the tune contingent upon the guidance (rotation) tab that is on each vane, what can happen to your accuracy if one or more of the guidance tabs is damaged while in the field and you do not know it?
#9
Join Date: Feb 2003
Location: Alexandria La. USA
Posts: 124

ORIGINAL: c903
I did not read anything in the test report that indicates that Quikspin vanes can accomplish anymore than what can be accomplished with other types of quality fletching mounted on a well-tuned arrow, to justify the price.
I did not read anything in the test report that indicates that Quikspin vanes can accomplish anymore than what can be accomplished with other types of quality fletching mounted on a well-tuned arrow, to justify the price.
#10
Join Date: Feb 2003
Location: Illinois
Posts: 1,862

Not getting good flight performance from a broadhead mounted shaft is often a result of incorrect spine for the broadhead and broadhead alignment... or both. Too many shooters believe that the same shaft that was flying well and accurate when mounted with a FIELDPOINT, should ALWAYS do the same with a broadhead as long as the broadhead weighs the same as the FIELDPOINT. Not true!
I use 5" feathers on my shafts set at a 1-degree offset, and I shoot off a prong rest. I know that after I shoot in with my fieldpoints I am going to have to tweak the draw-weight and readjust the sights…and maybe tweak the centering and tension on my rest, for the particular broadhead. I commonly get excellent flight and accuracy out to 40 yards.
I use 5" feathers on my shafts set at a 1-degree offset, and I shoot off a prong rest. I know that after I shoot in with my fieldpoints I am going to have to tweak the draw-weight and readjust the sights…and maybe tweak the centering and tension on my rest, for the particular broadhead. I commonly get excellent flight and accuracy out to 40 yards.