BowTech BlackKnight >>>>-------------->
06-10-2004 | 10:55 AM
#11
Thread Starter
Joined: Feb 2003
Posts: 2,057
Likes: 0
From: Alvo Nebraska USA
RE: BowTech BlackKnight >>>>-------------->
Well, the shop let me shoot it again today
, with 29 inch modules!!! It threw a 350 grain arrow through the chrono at 344 fps!!! No, no arm slap,,, but your results night be different
The draw length seemed to be very close to my needed 29 1/2 inches,,, maybe 29 1/4 so it's not very much longer than actual AMO length. Noise was about the same as my '04 Patriot Dually,,, which is really suprising!!! It's well balanced and recoil was more than my Patriot but I'm sure it's still less than some of my older bows. I'd sure like to shoot this one at distances to see just how it shoots!!!
, with 29 inch modules!!! It threw a 350 grain arrow through the chrono at 344 fps!!! No, no arm slap,,, but your results night be different The draw length seemed to be very close to my needed 29 1/2 inches,,, maybe 29 1/4 so it's not very much longer than actual AMO length. Noise was about the same as my '04 Patriot Dually,,, which is really suprising!!! It's well balanced and recoil was more than my Patriot but I'm sure it's still less than some of my older bows. I'd sure like to shoot this one at distances to see just how it shoots!!!
06-10-2004 | 11:20 AM
#12
Giant Nontypical
Joined: Feb 2003
Posts: 6,455
Likes: 0
From: Burleson TX USA
RE: BowTech BlackKnight >>>>-------------->
I'd sure like to shoot this one at distances to see just how it shoots!!!
Both my BK's have surprised the heck out of me on how well they actually shoot for a short brace bow.
Now if only I could find more time to shoot them
Plus get out hog hunting instead of the rabbits at work
[:-]
06-10-2004 | 04:45 PM
#13
Nontypical Buck
Joined: Feb 2003
Posts: 2,214
Likes: 0
From: Arlington TX USA
RE: BowTech BlackKnight >>>>-------------->
ORIGINAL: walks with a gimp
I got a chance to shoot a BlackKnight today SPPPEEEED is all I can say!! This one was a 70 pounder with 30 inch mods and I shot a 350 grain arrow through the chrono at 355 fps I then tried one of my own 452 grain aluminum arrows and it went 321[8D] Now, if i've figured this right, that would be 103.44 ft. lbs. K.E. That's enough to hunt trophy colosalmonsters!!!!!!!! Noise was not nearly as much as I thought it would be and though I didn't shoot more than about 10 arrows, accuracy seemed good for the bow being not set up for me. It will give your shoulder a work out though!!!
I got a chance to shoot a BlackKnight today
SPPPEEEED is all I can say!! This one was a 70 pounder with 30 inch mods and I shot a 350 grain arrow through the chrono at 355 fps I then tried one of my own 452 grain aluminum arrows and it went 321[8D] Now, if i've figured this right, that would be 103.44 ft. lbs. K.E. That's enough to hunt trophy colosalmonsters!!!!!!!! Noise was not nearly as much as I thought it would be and though I didn't shoot more than about 10 arrows, accuracy seemed good for the bow being not set up for me. It will give your shoulder a work out though!!!
Depending on how much I like Ausie's BK, I'll probably buy one next year. I keep hearing of a BK Pro that will IBO over 360 fps. [:-]
I'm already saving up.
06-10-2004 | 11:46 PM
#14
Thread Starter
Joined: Feb 2003
Posts: 2,057
Likes: 0
From: Alvo Nebraska USA
RE: BowTech BlackKnight >>>>-------------->
Sorry, I don't want to cause any problems with anyone's marriage but these bows just plain and simple ROCK THE HOUSE I've got enough bows right now, but I'm seriously thinking about "pushing the tolerance level" here at home[&:]
Hey, I'll bet if you had enough bows you could ,,, and might have to make a shelter out of them if need be Have a great weekend!!!!
but these bows just plain and simple ROCK THE HOUSE I've got enough bows right now, but I'm seriously thinking about "pushing the tolerance level" here at home[&:] Hey, I'll bet if you had enough bows you could ,,, and might have to make a shelter out of them if need be
Have a great weekend!!!!
