HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Technical (https://www.huntingnet.com/forum/technical-20/)
-   -   HOW DO YOU DETERMINE WHAT GRAIN OF BROAD HEAD TO USE. (https://www.huntingnet.com/forum/technical/59385-how-do-you-determine-what-grain-broad-head-use.html)

texasaggiebowhunter 04-20-2004 12:52 PM

HOW DO YOU DETERMINE WHAT GRAIN OF BROAD HEAD TO USE.
 
JUST WONDERING.

Rangeball 04-20-2004 12:54 PM

RE: HOW DO YOU DETERMINE WHAT GRAIN OF BROAD HEAD TO USE.
 
FOC and Finished arrow length/weight goal, primarily.

texasaggiebowhunter 04-20-2004 12:54 PM

RE: HOW DO YOU DETERMINE WHAT GRAIN OF BROAD HEAD TO USE.
 
I SHOOT A PSE FIREFLITE LC.70# PEAK WITH A CARBON EXPRESS TERMINATOR 60-75 4" HELICALS WITH A 100GRAIN SHOCKWAVE. I HAVE DONE GOOD JUST WONDERING IF I WAS OPTIMIZING MY POTENTIAL

jmac_or 04-20-2004 02:04 PM

RE: HOW DO YOU DETERMINE WHAT GRAIN OF BROAD HEAD TO USE.
 
I mainly look at arrow weight and FOC. My finished arrow is around 440 gr with an FOC of 9.7. This gives me very good BH flight. Just play around and you will find what works. I also wanted a bit heavier weight for hunting, so I went with the 125 gr head, Magnus Stinger to be exact.

JMAC

ewolf 04-20-2004 02:13 PM

RE: HOW DO YOU DETERMINE WHAT GRAIN OF BROAD HEAD TO USE.
 
I determine mine by the spine the bow needs. I change point weight and change the pondage until i get as close as possible (bare shafts tells you how to adjust the bow to the arrows). IF YOU CHANGE THE POINT WEIGHT YOUR BOW NEEDS TO BE RETUNED. I always check FOC but have never been outside of 10-15%. i always retune to all point sizes and see which groups the best.

mammasboy 04-20-2004 03:07 PM

RE: HOW DO YOU DETERMINE WHAT GRAIN OF BROAD HEAD TO USE.
 
Will a heavier tip penetrate better?

ewolf 04-20-2004 05:12 PM

RE: HOW DO YOU DETERMINE WHAT GRAIN OF BROAD HEAD TO USE.
 

ORIGINAL: mammasboy

Will a heavier tip penetrate better?
Yes, but it will cause very little increase in pentration from 100 to 125 grains. I worry more about accuracy because i used fixed head broadheads that penetrate very well.

PABowhntr 04-21-2004 05:00 AM

RE: HOW DO YOU DETERMINE WHAT GRAIN OF BROAD HEAD TO USE.
 
Those terminators are a relatively heavy carbon arrow. Depending on spine issues you may want to give the 125 grain points a try to see how it impacts accuracy, group size, etc... You may be able to "optimize" a bit more with the heavier point weight.

mrfritz44 04-21-2004 05:29 AM

RE: HOW DO YOU DETERMINE WHAT GRAIN OF BROAD HEAD TO USE.
 
BowJackson

This site is great for figuring out the details of your arrow design.

texasaggiebowhunter 04-21-2004 08:20 AM

RE: HOW DO YOU DETERMINE WHAT GRAIN OF BROAD HEAD TO USE.
 
I HAVE USED THAT SITE BEFORE. THEY HAVE ALOT OF GOOD INFORMATION


All times are GMT -8. The time now is 03:30 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.