Sight tapes from the archery program?
#2
RE: Sight tapes from the archery program?
I use Archers Advantage:
Dead on accurate when you use a scale and 3 different yardages like 20 yards,40 yards and 60 yards.
I just use a chrono reading and am usually perfect out past 70 yards.I need to fine tune the fps beyond that but am really close.
You need to know the sight length from peep at full draw,peep height(center of peep to center of arrow at full draw),speed,arrow weight,arrow diameter(already in program),fletching size.
Looks more difficult than it is.
I absolutely love Archers Advantage and I also love being able to make complete changeovers with my setup at night and go out the next day and be sighted in and shooting in a matter of minutes all the way out to 70 yards.In 1 yard increments I might add.
Dead on accurate when you use a scale and 3 different yardages like 20 yards,40 yards and 60 yards.
I just use a chrono reading and am usually perfect out past 70 yards.I need to fine tune the fps beyond that but am really close.
You need to know the sight length from peep at full draw,peep height(center of peep to center of arrow at full draw),speed,arrow weight,arrow diameter(already in program),fletching size.
Looks more difficult than it is.
I absolutely love Archers Advantage and I also love being able to make complete changeovers with my setup at night and go out the next day and be sighted in and shooting in a matter of minutes all the way out to 70 yards.In 1 yard increments I might add.
#4
Join Date: Feb 2003
Location: Chesapeake VA USA
Posts: 135
RE: Sight tapes from the archery program?
I use OnTarget! and it is right on the money. It has a ton of great features (both for target archers and hunters) and you can test it out for free and then when you decide to buy it it does not hurt the wallet
Check it out!
www.pinwheelsoftware.com
Check it out!
www.pinwheelsoftware.com
#5
Typical Buck
Join Date: Feb 2003
Location: Buford GA USA
Posts: 567
RE: Sight tapes from the archery program?
You can get a fairly accurate tape without any measurements, you just need to set a couple of pins, say 20 and 50 yards, and measure the gap.
There are alot of ways to set tapes with TAP, some are more involved than others. All of the tapes I have printed using TAP have been very accurate.
There are alot of ways to set tapes with TAP, some are more involved than others. All of the tapes I have printed using TAP have been very accurate.