Cybertec has arrived!!!
02-12-2002, 11:32 AM
#1
Fork Horn
Thread Starter
Join Date: Feb 2003
Location: Stoughton Wisconsin USA
Posts: 198
Cybertec has arrived!!!
Well the Cybertec is in my hands! Have it here at work with me, and I can tell now I wont be getting any work done this afternoon!<img src=icon_smile_big.gif border=0 align=middle>
02-12-2002, 12:38 PM
#3
Boone & Crockett
Join Date: Feb 2003
Location: Lehigh County PA USA
Posts: 12,157
RE: Cybertec has arrived!!!
How the heck did you sneak a bow into your place of work? If I tried that one then they would take me away in handcuffs....<img src=icon_smile_big.gif border=0 align=middle>
02-12-2002, 01:27 PM
#4
Fork Horn
Thread Starter
Join Date: Feb 2003
Location: Stoughton Wisconsin USA
Posts: 198
RE: Cybertec has arrived!!!
Very easy going here at work! I do alot of my test/tune at the office! In fact I even once while paper tuning "hit" a soft spot on my block target, arrow blew through and WAM into the wall at work! <img src=icon_smile_shock.gif border=0 align=middle> Had to patch the hole QUICK! Even have 15 acres here at work which most years I take one doe off of during bow season! Didnt this year!<img src=icon_smile_sad.gif border=0 align=middle>
02-12-2002, 03:01 PM
#7
Join Date: Feb 2003
Location: Fayetteville GA USA
Posts: 203
RE: Cybertec has arrived!!!
The CyberTec in your hands is a good feeling, isn't it? You know it is. I could hold mine all day long...
Hey, I took 4 deer off of one of our jobsites last year! I loved it! Hunted for an hour before work, and an hour after work!!
Hey, I took 4 deer off of one of our jobsites last year! I loved it! Hunted for an hour before work, and an hour after work!!
02-12-2002, 07:06 PM
#9
Fork Horn
Thread Starter
Join Date: Feb 2003
Location: Stoughton Wisconsin USA
Posts: 198
RE: Cybertec has arrived!!!
WOW!! Do I like this bow! Did some shooting just now in the garage with the chrono. Right now have it set-up as follows: 29" draw(#2 versa cam), 60# draw weight, only 1 nock set on string (will be going with a loop), shooting a Carbon Express 3-D select 200 weighing 345g, shooting 279fps!! Will be putting on a custom string this weekend, which a friend allready has one like it on his Havoctec and he picked up 12fps over factory string. So even if I gain 10fps on the string I will/should be around 289fps shooting at 60# !!! Of course I will be adding a fletcher Tru-Peep which might take a foot or two away, but then again the center serving will be short served on custom string, where as factory string has a ton of extra length serving on center weighing it down. I am REALLY impressed with this bow! Also, shooting WITHOUT a stabilizer and ZERO hand shock!And this bow is so stable and solid its great! No need for cat whiskers either as this bow is QUIET!! I cant even think right now Im so pumped about this bow!!<img src=icon_smile_big.gif border=0 align=middle>