Fixed Broadhead
#1
Thread Starter
Typical Buck
Joined: Dec 2003
Posts: 970
Likes: 0
From: Mertztown, PA
Has anyone got experience with Rocky Mt Titanium 100's or their Advantage 100's? Also, I'm considering Innerloc 100's as I've heard these are well built and sharp. I'm looking for SHARP 3 blade heads in 100 grains that have a similar construction to the Muzzy's or Innerlocs.
Thanks,
Fritz
PS: Muzzy need not apply...........at least not until they start using harder steel in their blades!
Thanks,
Fritz
PS: Muzzy need not apply...........at least not until they start using harder steel in their blades!
#4
Nontypical Buck
Joined: Feb 2003
Posts: 2,978
Likes: 0
From: Vinton VA
I personaly Love Muzzy heads, but since you want something else, the Wasp hammers or bullets are great, along with the Rocky Ti's. All of these heads have preformed very well in my tests. The innerlocs are good heads as well but their blades are no better than Muzzys and I don't personaly like there tip when compared to a Muzzy.
#7
Same here. The Wasps would be my second choice after the Muzzys. Have you looked at the Montec heads yet?
Check out 5shot's webpage for broadheads. You might find some helpful info there.
www.broadheadtests.com
Check out 5shot's webpage for broadheads. You might find some helpful info there.
www.broadheadtests.com
#8
Joined: Feb 2003
Posts: 242
Likes: 0
From: Southeast PA
The Wasp BOSS SST is my recommendation. It has sharper blades, a smaller profile for better flight characteristics, and is just as tough as a Muzzy. If you shop around, the price is on par with the Muzzys as well.




