HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Technical (https://www.huntingnet.com/forum/technical-20/)
-   -   LIBERTY WORKS WONDERS!!!! (https://www.huntingnet.com/forum/technical/50340-liberty-works-wonders.html)

GVDocHoliday 01-21-2004 08:58 PM

LIBERTY WORKS WONDERS!!!!
 
Well guy's, I got the call everyone wants to hear...and that is that their bow has arrived. So today I took my copper john dead nuts, GKF golden premier, and well basically all my archery nick-nacks. Decked out ol lady liberty, tuned her up, sighted her in, proceeded to my league shoot and lowered my handicap by 16 points[:o][:o] Seriously, I had a 35 handicap(don't ask I had two bad averaging days), I wander in today and shoot a respectable 285...A perfect 300 round though with my handicap. Since this was our first actual point shoot, I am tied for first place. I can only get better because I still need to fine tune her up, I have a Golden Key Infiniti fall away that should be here tomorrow and a archers choice target sight that should also be here tomorrow. I only shot my bow 150 times today and she's already semi dialed in at 20 yards. I just can't wait til next wednesday when I'll have her all shot in and decked out in even sexier accesories.

Buck Magnet 01-21-2004 09:18 PM

RE: LIBERTY WORKS WONDERS!!!!
 
Congrats man :D:D:D

It is amazing how stable this bow is. The VFT mixed with the large idler wheel/cam make this thing feel MUCH larger than it is.

Now, get that stuff on the bow, get it tuned up, and post some pics :D:D

walks with a gimp 01-21-2004 11:51 PM

RE: LIBERTY WORKS WONDERS!!!!
 
Yea!!! we need pics!! Before you get too many shots on that little beauty, take a small piece of self stick white label paper and place it under the limb fork area on your lower cam. On this white label paper, put a mark on the paper on each side of the limb for future reference on exact cam positioning. The string and cable on the wife's new Pat VFT has not budged a tiny fraction yet,,, good stuff!!!:D
Congrats on the new Liberty!!!

PABowhntr 01-22-2004 05:07 AM

RE: LIBERTY WORKS WONDERS!!!!
 
Nice setup. It sounds pretty darn like what I typically use. :D Glad to hear that your confidence is up and that you are shooting better than before.

GVDocHoliday 01-22-2004 05:41 AM

RE: LIBERTY WORKS WONDERS!!!!
 
These are the only pics I have of now. I'll get some more up this evening.





OH, one more thing, I have had absolutely no problem with getting good centershot on my liberty. I have all kinds of adjustment left on my premier rest(which actually has a pse mount bar).

Is the grip on this thing not beautiful?

mrfritz44 01-22-2004 06:54 AM

RE: LIBERTY WORKS WONDERS!!!!
 
I see you've got an aftermarket cable slide on there. What make is that? I just put an Alpine Archery teflon/rubber slide on my Patriot to alleviate a fletching clearance issue. I haven't shot it yet but clearance looks good now.

Did you have the same problem?

Fritz

GVDocHoliday 01-22-2004 07:57 AM

RE: LIBERTY WORKS WONDERS!!!!
 
That's just sims cable slide that I put on all of my bows that I get. I put it on before I even shot it and I haven't noticed any cable clearance issues whatsoever.


All times are GMT -8. The time now is 04:47 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.