BCY 452X vs. BCY 8125
01-09-2004 | 06:01 PM
#1
Thread Starter
Joined: Oct 2003
Posts: 224
Likes: 0
From: Massachusetts
BCY 452X vs. BCY 8125
Anyone know what the speed difference would be between these two string materials on your average 310 fps IBO bow. If its only around 7 fps or so do you think its worth giving up a little speed and going with 452X for total stability on a two cam bow ?
Thank you
BD
Thank you
BD
01-10-2004 | 03:39 PM
#3
Thread Starter
Joined: Oct 2003
Posts: 224
Likes: 0
From: Massachusetts
RE: BCY 452X vs. BCY 8125
I got an e-mail response from BCY they say the difference is approx 4 fps when used on the same bow, of course this will vary slightly depending on the bow. They suggested 452X in the cables for a dual cam setup for stability and 8125 on the string for the additional speed.
01-10-2004 | 06:34 PM
#4
Nontypical Buck
Joined: Feb 2003
Posts: 3,058
Likes: 0
From: CT, USA
RE: BCY 452X vs. BCY 8125
ORIGINAL: Bowtech Dually
I got an e-mail response from BCY they say the difference is approx 4 fps when used on the same bow, of course this will vary slightly depending on the bow. They suggested 452X in the cables for a dual cam setup for stability and 8125 on the string for the additional speed.
I got an e-mail response from BCY they say the difference is approx 4 fps when used on the same bow, of course this will vary slightly depending on the bow. They suggested 452X in the cables for a dual cam setup for stability and 8125 on the string for the additional speed.
