Sight problem--do I replace?
11-27-2014 | 02:32 PM
#1
Thread Starter
Nontypical Buck
Joined: Oct 2007
Posts: 1,146
Likes: 0
From: NE Kansas
Sight problem--do I replace?
I recently purchased a used PSE Nova from a pawn shop.
I've discovered the Hex screws that hold the sight to the mounting bracket are froze up and buggered. A hex key turns in them. Hence, i can't adjust the entire sight itself.
The pins move, no problem. The mounting bracket for the whole sight will come off.
Do I replace the sight or are there other options. I'd just get a cheap for the moment.
FWIW: Right now, the top pin is hitting about a foot high at 25 yds. I can't move the pin any higher. I'm a beginner and am just trying to learn, but have a decent chance of hitting plate at that distance with it,
I've discovered the Hex screws that hold the sight to the mounting bracket are froze up and buggered. A hex key turns in them. Hence, i can't adjust the entire sight itself.
The pins move, no problem. The mounting bracket for the whole sight will come off.
Do I replace the sight or are there other options. I'd just get a cheap for the moment.
FWIW: Right now, the top pin is hitting about a foot high at 25 yds. I can't move the pin any higher. I'm a beginner and am just trying to learn, but have a decent chance of hitting plate at that distance with it,
11-27-2014 | 03:43 PM
#2
Nontypical Buck
Joined: Aug 2014
Posts: 1,168
Likes: 0
From: gilbert az
take the sight off and try one of those easy out tools and soak the screws with break free or some sort of penetrating type of lube that should be able to get them off then just get some new screws and your all set !
11-27-2014 | 07:32 PM
#3
Thread Starter
Nontypical Buck
Joined: Oct 2007
Posts: 1,146
Likes: 0
From: NE Kansas
I'll give it a shot.
Will I need to order screws or would something suitable from a hardware store perhaps? If I need to order, where from?
Will I need to order screws or would something suitable from a hardware store perhaps? If I need to order, where from?
Last edited by Father Forkhorn; 11-27-2014 at 07:41 PM.
11-28-2014 | 05:47 AM
#4
Boone & Crockett
Joined: Jan 2004
Posts: 12,823
Likes: 4
From: Eastern PA
replacement bolts can normally be found in a hardware store.
