The Roller Guard' s worth
09-22-2003 | 11:22 AM
#11
Giant Nontypical
Joined: Feb 2003
Posts: 6,455
Likes: 0
From: Burleson TX USA
RE: The Roller Guard' s worth
Ok Jeff.
I just got off the phone on a conference call with the rest of the " USUAL SUSPECTS"
Now you have 2 choices here you can either run and be tared and feathered tired.
Or you can stand up like a man and get tared and feathered anyway[
][:-][&:]
I just got off the phone on a conference call with the rest of the " USUAL SUSPECTS"
Now you have 2 choices here you can either run and be tared and feathered tired.
Or you can stand up like a man and get tared and feathered anyway[
][:-][&:]
09-22-2003 | 01:09 PM
#12
Nontypical Buck
Joined: Feb 2003
Posts: 1,532
Likes: 0
From: NW Ohio USA
RE: The Roller Guard' s worth
Now you have 2 choices here you can either run and be tarred and feathered tired.
Or you can stand up like a man and get tared and feathered anyway
Or you can stand up like a man and get tared and feathered anyway
I say we make him choose option #2.
[>:]
09-23-2003 | 07:19 AM
#13
Nontypical Buck
Joined: Feb 2003
Posts: 2,890
Likes: 0
From: WEST PALM FLORIDA
RE: The Roller Guard' s worth
It’s the half-truth/BS advertising, and the holier-than-though attitude of the company (and a select few shooters/staffers) that rubs me the wrong way about Mathews. But I give credit where credit is due re: the bows themselves
10-03-2003 | 02:32 PM
#15
Joined: Sep 2003
Posts: 7
Likes: 0
RE: The Roller Guard' s worth
Do i think think it makes a big difference...no. But if you want to be technical then yeah it will make for smoother shooting...But if Mathews dont have a new inovations then they dont have a product to sell...So its a little bit of biz along with adding newer technology, which is why Mathews are who they are...I have the Legacy and i think the best inovation they have is the string supressors...I would pick those of the roller gaurd...but if you can have both then ya might as well just take it....thats my opinion..
10-05-2003 | 09:49 AM
#16
Fork Horn
Joined: Feb 2003
Posts: 115
Likes: 0
From: Dunlap TN USA
RE: The Roller Guard' s worth
big country is right it does take a lighter limb for the roller gaurd i did r&d for almost 2 yrs on a roller gaurd for hca before it came on the mathews but there are more problems then gains one of the main ones if the gaurd is not in exactly the middle of the bow it will preload one limb more then the other check this out draw the bow and have a bouddy look at it he will see one limb is bent more then the other and we all know what problems this brings
