Ronin802

I picked up a Martin Jaguar from my brother in law Friday. Its a dual cam model. I was told it has a 29 inch draw. I am looking for info on the cams and cam modules. I checked the Martin web site and cant find these cs or modules listed
Here is the marking on the cam


Here is the module
It says 7x



And the whole bow



Thanks for the help

BGfisher

I did some homework. If you get on Martin's website you can find the bow and specs charts. Click on Catalogs and scroll down to past catalogs. Same goes for specs charts and manuals. The bow appears to be a 2003 Jaguar with Z cams. 2003 was the last year for the Z cams. If it is a Jag then the 7x mod should make it a 31" draw. I would have the bow measured to see what it actually is. Don't guess and don't take someone's word for it.

Currently modules are still available for thee cams and part# 3025, but you have to know which number you need. I would not go by what somebody TOLD me the draw length is. Have it measured and know for sure. If it turns out to be 31" with the 7x module then a 6x would equal 30" and so forth down to 1x equalling 25".

Hope this helps. If you have further questions I would suggest a visit to Martin's Tech Forum. Lot's of good help there by Martin owners. If you want to register and post then PM me (bfisher) there and I can activate you.