HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Technical (https://www.huntingnet.com/forum/technical-20/)
-   -   Contact on my MZE (https://www.huntingnet.com/forum/technical/35541-contact-my-mze.html)

Capt Ray 08-18-2003 06:21 PM

Contact on my MZE
 
There are signs of fletching contact on my Muzzy Zero Effect. Is this normal or is the rest not properly set up? Groups are not what they should be at 20 yards (2 1/2 - 3" ) and even worse at 25 (3 - 5 " ). Also, I did not shorten the length of my arrows after going to the MZE, could this be part of the problem?

gulfcoasthunter 08-18-2003 06:45 PM

RE: Contact on my MZE
 
I just got the ze also and am noticing the same thing on my hoyt ultratec. I' ll have it back at Morgans tommorro.

Capt Ray 08-18-2003 07:17 PM

RE: Contact on my MZE
 
Thats the same place mine is going in the morning. Hmmmmm.

yajsab 08-18-2003 11:06 PM

RE: Contact on my MZE
 
I had mine about two years now. When the shop installed the rest on my bow, it had fletching contact. This was the first time they install the MZE. I didn' t bother them. I just talked to Muzzy rep, and they sent me a new turnbuckle FREE. I install it myself. Now I don' t have any contact at all. It shoots great!

trestand 08-20-2003 06:19 AM

RE: Contact on my MZE
 
Sounds like an install problem.If the turnbuckle is cut too short,the arrow rest will be too high.The " claw" should be just below the riser shelf,at lease thats where I always set mine.If the MZE is set-up right,and your bow is tuned,there is no way you will get any contact.By the way,I had an 03 SC Patriot that did' nt have enough cable slide movement to operate the MZE.You can call Kevin at Muzzy and talk to him before you go back to you archery shop and bust their chops......1-800-222-7769.Good luck,Bob

tech 08-20-2003 07:00 AM

RE: Contact on my MZE
 
Captain Ray, you should have no contact wiyh the rest. You can call me at muzzy and we will fix your problem. In responce to the other gentelman we have no kevin working at muzzy. Eric

RacHunter 08-20-2003 11:50 AM

RE: Contact on my MZE
 
Make sure the shop gives you the video that comes with the ZE sometimes when they install the rest the just toss the video aside. I went through some problems when mine was installed and after watching the video I found out that it was not adjusted right.
Fixed it myself and everything is fine now.

Capt Ray 09-18-2003 11:27 AM

RE: Contact on my MZE
 
gulfcoasthunter, give Eric a call at Muzzy, 1-800-222-7769. Morgans never did get mine right. LOL

hdsanders 09-18-2003 01:08 PM

RE: Contact on my MZE
 
Call Muzzy direct. They are great to work with and very willing to help.

trestand 09-19-2003 06:14 AM

RE: Contact on my MZE
 
OK,Tech, I got the name wrong,so sue me,but I got the phone number right.I did talk to Eric,about the cable attachment and a turnbuckle.Between Eric and Donna,they got everything taking care of....Bob


All times are GMT -8. The time now is 05:47 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.