How Solid a Back Wall on a.......
 

Dual Cam Patriot? I have a 2002 Single Cam,and im very interested in obtaining a Dual Cam as well,but would like to Have the Back Wall similiar to the Infinity Cam.This Bow is totally AWESOME and Deadly Accurate,and i cant wait to try the Dual Cam.Thank' s!

RE: How Solid a Back Wall on a.......
 

HiddenHunter,
The wall on the Dual Cam Patriot is obviously not going to be quite as solid as the Infinity single cam due to the I-Cam using a peg style draw stop which stops hard against the bow' s limb..............BUT it is about as solid of a wall as you are going to feel in a dual cam bow. I would compare it to the feel of the original BowTech post feed cam that didn' t utilize a peg style stop.
One note.....the wall is especially solid when this model (and all the Dual Cam BowTech models) is at it' s peak draw length for that model. For the Dual Cam Patriot that is at 30" . I have a 30" draw length, and for me the wall is as solid as any single cam bow I' ve shot.
On my Pro40 Dually I still have my normal 30" draw length, but since that model has room via module to extend to 31" the wall I experience on this bow Vs. the Patriot is just a tad less " rock" solid but still very nice. This is what any draw length under max for that model will feel like.

RE: How Solid a Back Wall on a.......
 

My 29 inch Pat DC' s wall is very solid. I still have my ' 02 single Pat and it sure is a keeper;). Cam sync is very important for the best wall on the BKII cams. Accuracy is as good or better than the Infinity cam when tuned right:D. Even when they are out of sync slightly the Dually is very forgiving and accurate.

RE: How Solid a Back Wall on a.......
 

I get the same speed with a 457 grain arrow at 64 pounds with the Dually as I get with the single at 71 pounds. Enjoy;)

RE: How Solid a Back Wall on a.......
 

Thank' s Gentelmen! Time to go Shopping again!

RE: How Solid a Back Wall on a.......
 

Yep, the wall is pretty solid on the Dually' s, but nothing is as solid as a limb stop ala the I-cam.

And Matt' s advice about draw length mods is spot-on!

[8D]