RE: Diamond Rock Draw Modules
 

en route my friend.

RE: Diamond Rock Draw Modules
 

Way to Go!!

Dan

RE: Diamond Rock Draw Modules
 

Brother,

I can't begin to thank you enough! To do this for a complete stranger sure says a lot about you and your character. Acts like this really make me believe that us hunters truly are a different breed!

Since I will need new arrows (longer), I need to "dispose" of 6 very lightly used Terminator Selects. Can I send them to you and have you give them to a needy (preferably young) hunter?

Again, many thanks!

As soon as the new mods are installed, I will send the old one to you - maybe someone else needs the 29" mods!

RE: Diamond Rock Draw Modules
 

shure, if ya want I run into kids all the time who cant swing enough to get a few arrows. You dont have to exchange the mod I have lots.

Changing draw lenght
 

I bought my first compound, a slightly used Diamond Rock a while ago and I need to change the draw lenght from what I believe was set at 29" to 30" also. I know that I have to change modules, but for now I have just moved the draw post to max(towards the 10 number) but the manual says never move the post more than 1/2 mark from factory setting, whitch was set at 5. Why should I not move it more than 1/2 mark, what could happen? I will get the modules needed as soon as possible and I have ordered a bowmaster bowpress to do the job. I dont see how I can change modules without a press, wouldn`t it `blow up in my face`if I just start unscrewing the limbs?
So can I shoot with the drawpost set at max or do I have to move the drawpost back to factory setting?

Do I need a bowpress to change modules?

As I am new to compound bows I really should get someone to tune my bow but unfortunately there are no bow shops in my area. So please help a rookie out:confused0024:

Please give me some adivce about The Diamond Bowtech Rock Compound Bow. I have read in http://archerycute.wikidot.com/