![]() |
Diamond Rock Draw Modules
Just bought a new Rock at 70lb,29". The genius who sold it to me at Cabelasdidn't measure the draw length or anything, but when I went back to get it tuned and the peep placed, I was measured. With my albatross arms, I'm actually pulling 30.5". I was told that a new draw module can be ordered from Bowtech/Diamond (the m1?) but that I "should not hold my breath" on getting it in.
What is a reasonable timeframe to get this shipped to Cabelas? It's been 2 agonizing weeks! I know guys are waiting months for new bows from Diamond, but how long should I give it before I call and start nagging? |
RE: Diamond Rock Draw Modules
I would contact BT directly or one of the staff guys around here- And I'd give the guy at Cabelas what for[:@]
|
RE: Diamond Rock Draw Modules
Although I am not sure on that particular module. You should get itin a week to 10 days if it is in stock at BowTech, and it got ordered by Cabela's.
Cabela's should carry a full set of mods for the bows they sell, but I know from past experiences working shows at Cabelas that they don't. Proper fit for a new Bow owner is a Must for giving him a good experience.;) Dan |
RE: Diamond Rock Draw Modules
that sucks, if ya need one Ill check and see if I got one and send it to ya
|
RE: Diamond Rock Draw Modules
Our cabelas is the same way, however our Bass Pro archery guy is awesome........(yeah its me)
|
RE: Diamond Rock Draw Modules
Order it direct from Diamond and change it yourself. No press is needed to make the change. It is held in by three allen screws.
|
RE: Diamond Rock Draw Modules
brotherbdc, PM sent. Thanks in advance!
contacted Diamond viaEMyesterday. Waiting for response. Called Cabelas this AM - told that the mods were "ordered last week - expect them in around April." |
RE: Diamond Rock Draw Modules
Ill check when I get to work tomorrow.......
|
RE: Diamond Rock Draw Modules
got it , Ill be sending the M1 on monday.
|
RE: Diamond Rock Draw Modules
ORIGINAL: brotherbdc got it , Ill be sending the M1 on monday. To the OP- If it were me I think I would have insisted Cabela's swap out the bow for aproperly fitting one after they failed to size you up correctly the first time! |
RE: Diamond Rock Draw Modules
en route my friend.
|
RE: Diamond Rock Draw Modules
ORIGINAL: brotherbdc en route my friend. ![]() Dan |
RE: Diamond Rock Draw Modules
Brother,
I can't begin to thank you enough! To do this for a complete stranger sure says a lot about you and your character. Acts like this really make me believe that us hunters truly are a different breed! Since I will need new arrows (longer), I need to "dispose" of 6 very lightly used Terminator Selects. Can I send them to you and have you give them to a needy (preferably young) hunter? Again, many thanks! As soon as the new mods are installed, I will send the old one to you - maybe someone else needs the 29" mods! |
RE: Diamond Rock Draw Modules
shure, if ya want I run into kids all the time who cant swing enough to get a few arrows. You dont have to exchange the mod I have lots.
|
Changing draw lenght
I bought my first compound, a slightly used Diamond Rock a while ago and I need to change the draw lenght from what I believe was set at 29" to 30" also. I know that I have to change modules, but for now I have just moved the draw post to max(towards the 10 number) but the manual says never move the post more than 1/2 mark from factory setting, whitch was set at 5. Why should I not move it more than 1/2 mark, what could happen? I will get the modules needed as soon as possible and I have ordered a bowmaster bowpress to do the job. I dont see how I can change modules without a press, wouldn`t it `blow up in my face`if I just start unscrewing the limbs?
Originally Posted by txjourneyman
(Post 3240369)
Order it direct from Diamond and change it yourself. No press is needed to make the change. It is held in by three allen screws.
Do I need a bowpress to change modules? As I am new to compound bows I really should get someone to tune my bow but unfortunately there are no bow shops in my area. So please help a rookie out:confused0024: |
Please give me some adivce about The Diamond Bowtech Rock Compound Bow. I have read in http://archerycute.wikidot.com/
|
| All times are GMT -8. The time now is 06:26 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.