Buying some new arrows
 

Well Iam going to buy some new arrows this weekend, so before I go out and spend my hard earned money I have a few questions about arrow selection. Sofirst I will mention my numbers. Iam shooting a 26" draw length and a 60lb draw weight. So with this what spineand what grain broad heads would you all reccomend? I was looking at some easton epic 400's but just wanted to know if that was best for my bow as far as how the arrow is spined. Well any help is appriciated and if any more info is needed I will gladely let you know.

RE: Buying some new arrows
 

Take some time and tell us more specifics about the bow. You say your draw is 26". Is that you or the bow? You need to actually measure the draw length of the bow. Bow stickers and module numbers are not always accurate.

If the bow and you are indeed 26" then you migh be able to get away with a 25" arrow. In this case you could get something with a 500spine. That leaves you open to a lot of different shafts depending on whether you want to shoot a light arrow for speed or a little heavier for hunting, or anything in between if you want an all-purpose arrow.

Point weight (forget broadheads for now) can help determine the length of shaft you choose, but 100 grains seems to be the most common weight used. I mean that about broadheads. If you aren't planning on setting this up for hunting in the next few months then what broadheads you choose is the least of your worries.

Easton Epics can be OK, as would Beman ICS. Want something lighter there's the Easton Litespeed. Guess you're also looking at price, right. Epics or ICS. You should be looking for a 500 spine though.

RE: Buying some new arrows
 

What bow are you shooting....Cam type, and what weight BH/FP are you planning to attach to the end of that arrow.

RE: Buying some new arrows
 

Iam shooting a Martin Saber with the m2 cams. I will probably keep with my 100 grain strikers. I did have Easton Epic 500's for last season but I seemed to have lost all but 2 of them and Iam not ready to drop that kind of money for the axis's.

RE: Buying some new arrows
 

Who said anything about Axis? You want cheaper? Try Beman ICS Venture 500. Something like $50/doz at Lancaster. OK, not the highest quality on the bock, but it's your wallet you have to open. They'll work as well as anything else at this point.

RE: Buying some new arrows
 

I set up a Martin Tracer 26.5" @ 60# for a buddy, and we went with a LONG 28" arrow, because it helped get the spine where it needed to be w/ a 100gr tip. You can look at GT 3555 series, or whatever else you find in a 500 series. The shorter you go, the weaker spine you need, if you go with something 25" long or so, you're gonna need a .550 spine to be "optimal," keep the arrow longer 27-28", and you can get away with a .500 spine, which is more common.

RE: Buying some new arrows
 

[quote]ORIGINAL: BGfisher

I had meant to say axis and not epics. I liked the arrows alot however I didnt like the price tag that came with them. Anyway thanks for the help guys.