RE: Treelimb quiver and HHA Optimizer sight
 

I used a piece of BLACK small bore 1/4" PVC pipe to set up one of my bows this same way, Not sure I'd use arrow shaft though, you could probably run to your local hardware store and get a great assortment of things to do the job, nice little rubber bushings would probably be great, but when I had this stuff laying around, it was perfect for my needs.

RE: Treelimb quiver and HHA Optimizer sight
 

Last night I used the spacers that came with the Sight. I used a 1 1/2" screw with 10-32 threading. It will work but I do not like the fact that the quiver sits so high off the riser. I really like the quiver but may have to go back to my two piece Mathews quiver or do something like Bigbulls did,

RE: Treelimb quiver and HHA Optimizer sight
 

If you want a riser call me sometime next week. I have a few at the store and they aren't expensive.

RE: Treelimb quiver and HHA Optimizer sight
 

Bigbulls,

I believe that is the only setup I am willing to do. Will PM you

RE: Treelimb quiver and HHA Optimizer sight
 

The Mathews T5 quiver is really the best option if you have a Mathews bow, I consider it the best quiver on the market today. The treelimb is a very close second to it though and since I sold my Drenalin I am now switching to a treelimb for my Guardian.

RE: Treelimb quiver and HHA Optimizer sight
 

I used the spacers that came with he sight to mount my Octane quiver. It worked, but the bow is war off balance because the quiver sticks out so far. I cannot shoot with it on.

Bigbulls, does this option that you are suggesting solve this problem? Please try to set an octane quiver up on that bow, shot it, and tell me if it feels balanced. If it does, I will buy one from you as well.

RE: Treelimb quiver and HHA Optimizer sight
 

I also have the Optimizer on my bow. The set up Big Bullshas ispretty cool butthe arrows still block or at leasthinderaccess tothe windage wheel ifyou're still hunting and need to get off a long shot quickly?

I have a tree limb quiver on mine and just used the spacer andthe longer screws provided in the HHA sight kit; however, I use a cat backquiver whenever possible and try not to have the quiver on the bow period.

One thing to be careful with these HHA sights which is there only big problem and that's to protect the fiberoptic pin as it's easily broken with a branch due to the exposed nature of the pin. I put a lens kit on for the sole purpose of protecting that pin.

RE: Treelimb quiver and HHA Optimizer sight
 

I put a lens kit on to help me see that monster buck at 70+ yards.