HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Technical (https://www.huntingnet.com/forum/technical-20/)
-   -   sts slap thought it would get quieter (https://www.huntingnet.com/forum/technical/268135-sts-slap-thought-would-get-quieter.html)

matt068 10-14-2008 11:48 PM

sts slap thought it would get quieter
 
Purshased an Sts for my Hoyt trykon My bow was pretty quiet but like all of us we must tinker. I chose the Sts mainly because of the side mount especially for the Hoyt Had my shop Who buy the way are incredible set up w/ serving etc . I shot seems it makes a distinct slapping noise which is louder than w/ out Sts. Anybody got the skinny on how to take the slap out of it. As it is string is resting firmly against stopper yet not overly tight is there a cetain distance that people have found rids the slap.thanks any and all for any advice!!!

drockw 10-15-2008 12:19 AM

RE: sts slap thought it would get quieter
 
just try different distances. try closer, further adn every way you can until you get the quietest result

strutnbuck 10-15-2008 09:23 AM

RE: sts slap thought it would get quieter
 
Try adjusting it to where the string is about 1/16" from the STS. And if you have string leaches, remove the top leach. I have a Hoyt Katera and Hoyt stopped putting the leach on top because they were finding that by having the leach on top, it was causing some string noise when the string hit the STS. Good luck.


5 shot 10-16-2008 03:20 AM

RE: sts slap thought it would get quieter
 
I would agree try moving the bar back and forth until you find the "sweet spot" I just installed one on my vectrix and it works very well with the string almost touching the bumper. you can slide a peice of paper between them, but thats about it.

stalkingbear 10-16-2008 07:02 AM

RE: sts slap thought it would get quieter
 
Like the other posters,it sounds to me also that you need to adjust it very slightly forward. Different bows require different distances so to be exact you'll have to experiment a little. I would reccomend 1/16"-1/32" clearence to start with between the sts and string.

strutnbuck 10-16-2008 02:52 PM

RE: sts slap thought it would get quieter
 
On another note, periodically you will have to adjust it as it "wears" as well.


OHbowhntr 10-16-2008 03:38 PM

RE: sts slap thought it would get quieter
 

ORIGINAL: strutnbuck

On another note, periodically you will have to adjust it as it "wears" as well.

I've not adjusted mine since I installed it and got it where I wanted it. Mine is about 1/16 - 3/32" but not quite and 1/8" from touching the string. And I've been pleased with it. I have probably 2,500 shots on it and it hasn't moved that I've noticed.


All times are GMT -8. The time now is 09:05 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.