![]() |
Spine me some arrows!...another ?
I need someone with the software to help me spine some arrows. I want to get some Beman ICS 400's or some Easton Epic 400's. I'm pulling 71# peak at 28". I would also like to shoot 100 gr tips and broadheads. Any help you all could offer would be appreciated. I would love to get the software, but I'm a Mac guy and don't have Windows installed on my machine.
|
RE: Spine me some arrows!
At 71 lbs., you are going to want a 340 series arrow if you are going to run a 28" shaft with 100 grain tips. Shorten the shaft to 26 or 27 inches, and you can get by with a 400 series.
|
RE: Spine me some arrows!
That's what I had thought, but some on here have mentioned that I'm a little stiff at 28" with the 340's. Just wondering if someone can confirm or deny that with OT or other software.
|
RE: Spine me some arrows!
Running the numbers thru OT, show 400 a little weak and 340 too stiff.
You can get by with 29" with 125gr head with the 340. Or you can go to 26" shaft with the 400 and 100gr head. Or just do the smart thing and drop to 65lbs and be good with a 28" arrow and 100gr head. |
RE: Spine me some arrows!
Thanks, bigcountry. I knew I was kind of between shafts. I normally do shoot around 65 lbs so maybe I'll give that a try.
|
RE: Spine me some arrows!
ORIGINAL: jbowersox Thanks, bigcountry. I knew I was kind of between shafts. I normally do shoot around 65 lbs so maybe I'll give that a try. |
RE: Spine me some arrows!
At 27.5" they shouldwork as I shot 400's out of my 71# Allegiance for a couple of years and they tuned very well.
One word of caution, single cams tend to like a little stiffer shaft than the Binarys in my experience though. Dan |
RE: Spine me some arrows!
Mine as well. My Mathews, set at 61 lbs., does not bare shaft tune the same as my Hoyt Vectrix XL set at 61 lbs. The Mathews, despite a lower IBO rating,needs an inch shorter shaft.
|
RE: Spine me some arrows!
ORIGINAL: MeanV2 At 27.5" they shouldwork as I shot 400's out of my 71# Allegiance for a couple of years and they tuned very well. One word of caution, single cams tend to like a little stiffer shaft than the Binarys in my experience though. Dan |
RE: Spine me some arrows!
What's the word on Easton ACC 3-49's. I've been thinking about taking the plunge. How will those do at 28" with a 100 gr point?
|
| All times are GMT -8. The time now is 07:43 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.