HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Technical (https://www.huntingnet.com/forum/technical-20/)
-   -   Draw Length HELP (https://www.huntingnet.com/forum/technical/253439-draw-length-help.html)

peakrut 07-18-2008 07:18 PM

Draw Length HELP
 
Ok I own a 1999 Hoyt Magnatec redline HL, Well I was doing some research and found this"
http://www.hoyt.com/customer_service/hoyt_tune_charts.php?page=99_magnatec.php

For the redline HL with 93 string length and 34 buss cable the max draw I can have is 27.
I looked at my bow and on the cam highest number is 3 which is 27.
My damn draw length is 29 and all these years ive been way off. I actually had him shorten it 2 years ago
because I thought it was to long but it turns out not even close. (Pro Shop)
Am I correct by reading the link above?


T

buckeye 07-18-2008 08:19 PM

RE: Draw Length HELP
 
It shows 28 inches is the longest DL you can have with those strings and cables.... Are you sure your bow only has 3 pegs rather than 4 to adjust your DL? Either way even if it did, if your DL is 29 it is still an inch short.

It was very obvious as we talked about at the GTG that your DL was way short....

Rob/PA Bowyer 07-18-2008 08:21 PM

RE: Draw Length HELP
 
Tony if I read your post right and the link provide right you saying 3 is 27" draw but I read the link as 3 is for 29, 30 or 31 depending on your module.

Are you saying your a 27" draw or the bow is a 27" draw you it should be a 29" to fit you?

peakrut 07-18-2008 08:28 PM

RE: Draw Length HELP
 
I am 29 DL but my cam is set at #3 and that link show #3 as 27. I dont see a #4 on my bow.
Rob I am not sure how you see it as 29, 30, or 31?
Yeah buckeye that is why I started investigating and I do thank you much.



Redline
Redline HL
75
4 lb 6 oz
37 1/4
6 7/8
93
34

1
25 DL
258-263
296-301

2
26
271-276
205-210

3
27
281-286
213-218

4
28
290-295
220-225

37 1/4
7
95.5
34.5
5
29
293-298
222-227

6
30
303-308
231-236

7
31
310-315
236-241

37 5/8
6 7/8
97.5
35
8
32
319-324
243-248

T

Rob/PA Bowyer 07-18-2008 08:30 PM

RE: Draw Length HELP
 
I'm not seeing that, when I click the link and then choose 99 Magnatech, a different window opens.

LOL, now I see, I didn't scroll down, I opened another window by choose 99 year and the Magnatech for model. My bad.


peakrut 07-18-2008 08:34 PM

RE: Draw Length HELP
 
LOL Its all good buddy.
Now I have bow in hand and on one side of the cam labeled redline the string is looped around 1.
If I turn the bow over its looped around 3 all the same peg.
I am going to try and post a pic, brb

MeanV2 07-18-2008 08:42 PM

RE: Draw Length HELP
 
Did you try to measure to see what the actual draw length of the bow is?

Regardless of charts, etc. It is what it is!;)

Dan

Rob/PA Bowyer 07-18-2008 08:43 PM

RE: Draw Length HELP
 
Man Tony, I wish I would have kept all my manuals and stats sheets from all those years with Hoyts.

peakrut 07-18-2008 08:45 PM

RE: Draw Length HELP
 
:)That will be my next step Dan, Anyway of doing this easily with just me and the wife?
See that hole under the 2, use to be a peg possibly?




peakrut 07-18-2008 09:12 PM

RE: Draw Length HELP
 
http://www.hoyt.com/customer_service/hoyt_tune_charts.php?page=99_magnatec.php
Scroll down Kev and you will see redline HL on this link.
93 string and 34 buss.


All times are GMT -8. The time now is 04:57 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.