![[Deleted]](https://www.huntingnet.com/forum/iconimages/technical/deleted_ltr.gif)
[Deleted]
02-24-2003 | 06:34 PM
#2
Joined: Feb 2003
Posts: 1,385
Likes: 0
From: Baltimore Maryland USA
RE: Muzzy Zero Effect for Hoyt Hypertec !
Putting a MZE on a HyperTec can be a difficult job, but not impossible. We' ve done a lot of them. You will need a Hoyt adapter plate which should be readily available from Dealers who stock the rests. We stock them.
Depending on the draw length, a cable slide stop may be needed as well. Hope this helps.
Depending on the draw length, a cable slide stop may be needed as well. Hope this helps.
