setting the poudage on a cybertec
04-22-2008 | 11:29 PM
#1
Thread Starter
Joined: Apr 2008
Posts: 5
Likes: 0
From:
setting the poudage on a cybertec
This is my first split limb bow and in wondering how to set my poundage this thing looks alot differnt than plan limbs is there anything special about setting the poundage on this bow it is the cam.5 thanks for any help you can give me
04-23-2008 | 08:02 AM
#2
Giant Nontypical
Joined: Feb 2003
Posts: 9,175
Likes: 0
RE: setting the poudage on a cybertec
You adjust weight on them just like on any other compound. Tighten the limb bolts right for more poundage. Loosen them for less poundage. Only extra thing about Hoyts is the locking screws under the limb butts. Two on the top limb bracket and two on the bottom. Loosen them up so you can make your adjustment and tighten them back down when you're done.
If you didn't get an owner's manual with your bow, here's the link to read it online. It's all explained in there.
http://www.hoyt.com/assets/downloads/manuals/08_Compound_manual.pdf
If you didn't get an owner's manual with your bow, here's the link to read it online. It's all explained in there.
http://www.hoyt.com/assets/downloads/manuals/08_Compound_manual.pdf
