HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Technical (https://www.huntingnet.com/forum/technical-20/)
-   -   Paper tuning stand (https://www.huntingnet.com/forum/technical/24033-paper-tuning-stand.html)

Jerry/Pa 02-18-2003 08:18 AM

Paper tuning stand
 
Dose anyone know where I can down load a pic or drawing of a paper tuning stand? I know what the basic stand should look like but I' d like to build one that has a paper roll attached. Also where can you buy the roll of paper. Thanks.JERRY

tm 02-18-2003 09:09 AM

RE: Paper tuning stand
 
You might want to reconsider having the roll of paper attached. The reason I say that is when I built mine out of pvc and tried to add the paper I had to make the stand too heavy to be real portable. Since I' ve taken the roll off and cut it down to the size of a standard newspaper sheet. I use binder clips to attach the paper. Now I can change the paper fairly easily and don' t have such a heavy frame.

Mykey 02-18-2003 12:25 PM

RE: Paper tuning stand
 
I made mine out of aluminium tubing and i also use binder clips to attach the paper and it works great. Before i built my frame i use to use a sturdy cardboard box and fold the flaps in on both ends and then tape my paper on one end and shoot through it. It wasn' t pretty but it was very inexspensive and it worked just fine.

BobCo19-65 02-18-2003 01:16 PM

RE: Paper tuning stand
 
I have also made one out of cardboard boxes. I use either treestand boxes or bow boxes. I cut out a window on both sides and tape the paper on. Again, it isn' t purdy, but it sure works.

vitalkiller 02-18-2003 05:47 PM

RE: Paper tuning stand
 
I made one out of coat hangers the other day. Only took about 5 min. All I did was untwits 2 hangers, and then twist them together making a square. Then I taped some paper to it. Works just fine.

Jerry/Pa 02-18-2003 06:52 PM

RE: Paper tuning stand
 
I appreciate all the qiuk fix models but this one is for my archery club so I need it semi sturdy. Thanks.JERRY

Jerry/NJ 02-18-2003 07:15 PM

RE: Paper tuning stand
 
Jer, I saw a diagram somewhere, I will look for it and email you if I find it.

Jerry

Jerry/NJ 02-18-2003 08:01 PM

RE: Paper tuning stand
 
Jer, I sent you the info via email.

jetblast 02-19-2003 05:41 AM

RE: Paper tuning stand
 
I mounted a plywood base to the adapter plate of a tripod camera stand. (crank up, crank down). On each end of the plywood, installed a long screw, slid two old arrows down over the screws for side rails, get a couple clothepins and some newspaper, and wallah!.

cdnarcher 02-19-2003 07:27 AM

RE: Paper tuning stand
 
Try out this link.
http://www.bowzone.ca/modules.php?op=modload&name=News&file=article&sid= 22


All times are GMT -8. The time now is 02:40 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.