HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Technical (https://www.huntingnet.com/forum/technical-20/)
-   -   Riddle me this draw length (https://www.huntingnet.com/forum/technical/237126-riddle-me-draw-length.html)

Germ 03-13-2008 06:55 AM

RE: Riddle me this draw length
 

ORIGINAL: TFOX

The brace shouldn't make a difference but it is possble that the specs on 1 bow could be off or the mounting hole could be different.In relation to where you grip the bow.

Is it the same rest?
Different rest, but I measured from the "end" of the bow shelf.

OHbowhntr 03-13-2008 07:10 AM

RE: Riddle me this draw length
 

ORIGINAL: TFOX

The brace shouldn't make a difference but it is possble that the specs on 1 bow could be off or the mounting hole could be different.In relation to where you grip the bow.

Is it the same rest?
Ditto, the BH should have nothing to do w/ drawlength. I was thinking more about grips on each, and if maybe some tweaking of strings might make them a little closer.

davepjr71 03-13-2008 07:43 AM

RE: Riddle me this draw length
 
Try measuring from the berger hole to tip of arrow on both bows. I'd be interested in what the differenceis beyond the DL difference between the 2 bows. If the shelves are 2 different length and the riser is shaped diffrently the arrow will be further or closer to the rest w/ 2 different bows.

A friend has a 1" shorter DL than me but we use the same arrow due to rest position and I believe my arrow sticks out further forward in relation to the berger hole on my bow than his does on his due to the narrower riser.

TFOX 03-13-2008 02:28 PM

RE: Riddle me this draw length
 

ORIGINAL: davepjr71

Try measuring from the berger hole to tip of arrow on both bows. I'd be interested in what the differenceis beyond the DL difference between the 2 bows. If the shelves are 2 different length and the riser is shaped diffrently the arrow will be further or closer to the rest w/ 2 different bows.

This is really irrelevant,think about it this way.The brace will change that measurement but a higher brace is basically just predrawing the bow a little but not adding any powerstroke,it is taking away powerstroke.


I looked at a picture of the cardiac and it has 2 mounting holes if memory serves.The back hole looks to be inline with the deepest point of the grip,how about the other bow?


All times are GMT -8. The time now is 12:55 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.