![]() |
Need help with my target arrows!!
I am trying to setup some target arrows and I'm trying to figure out if i should put feathers or vanes on my arrows. I'm trying to to get the lightest arrows possible to get the best speed out of my bow.
Thanks Mat |
RE: Need help with my target arrows!!
You might try the 1.5" Blazers.
|
RE: Need help with my target arrows!!
Where can i find those?
Mat |
RE: Need help with my target arrows!!
|
RE: Need help with my target arrows!!
Would 1" blazers work?
Mat |
RE: Need help with my target arrows!!
Feathers will be lighter than vanes, if that is what you are striving for.
You can find some smaller feathers which wouldn't weigh much (I saw on Lancaster Archery Supply a 1.75" feather right at 1.5 grains)....or just look around for the lightest vane possible if you prefer vanes over feathers. (1.5" Flex Fletch was nearly 2.8 grains) |
RE: Need help with my target arrows!!
ORIGINAL: whitetailbowhunter Would 1" blazers work? Mat If this is for indoor, I don't know why you would be wanting to go with speed anyways? If this is for 3-D, the size of the vane may be determined by which association you will be shooting in. Some clubs or shoots have a minimum fletching length. So that will be the driving force in your hunt for fletchings to build your arrows. |
RE: Need help with my target arrows!!
Remember that if your looking for speed feathers will be faster out of the chute simply because they are lighter. BUT...because they cause more drag will slow the arrow down a lot faster. So if your shooting 3D's you might find your pin gap opening up past 30 or 40yrds.
|
| All times are GMT -8. The time now is 09:44 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.