Refletching Arrows
 

What has everyone found to be the best way to remove old vanes fro carbon arrows.

My groups have been getting nice in size but costing me a number of vanes
Thanks for the help

RE: Refletching Arrows
 

Need to add email notification

RE: Refletching Arrows
 

Well..I have a tool that you slide on the arrow and it cuts it off..I forgot the name

[email protected]

RE: Refletching Arrows
 

Strip as much as you can off. Taking it down to the shaft is not necessary. Close is good. Remove the nock. Get a can of acetone. About five bucks. Stick the shaft in the can and let sit for a couple or as long as it takes to drink a bee:Dr. Remove and scrape off excess which will be an easy job and you shouldn't in any way damage the shaft.

The acetone evaporates very quickly and will clean it. Works great when stripping vanes put on with super glue. It will not harm the shafts. Read the precautions on the can.

Life was good the day I discovered how easy this made removing old vanes.:D

RE: Refletching Arrows
 

One more question what is the advnatage or disadvantage of using wraps. Does it make it easier to remove the vanes when it becomes time?