cobra viewmaster treestand sight ????
#1
Thread Starter
Join Date: Feb 2003
Location: long beach calif. USA
Posts: 2
cobra viewmaster treestand sight ????
I have a question's regarding this treestand sight.i installed 1 on my mathews bow. this sight has 2 pin's 1 for 15 yds and closes and 1 for 30 yds down to 15 has anyone used this sight and if so can i just use the 15 yd. pin and remove the 30 yd pin because the shot's i will hope to get will be under 20 yds. and 1 last question how does the stand height effect the shot angle, the higher the stand the steeper the angle? and the lower the stand the lower the angle?. so cal hunter
Edited by - so cal hunter on 01/15/2003 17:44:39
Edited by - so cal hunter on 01/15/2003 17:44:39
#2
Join Date: Feb 2003
Location: BURLINGTON IOWA USA
Posts: 10
RE: cobra viewmaster treestand sight ????
I have been using one since they came out and i love this sight.
I actually set mine for 20yrds on the ground and it will hit dead on at 30yrds, (15-30 ft. in a tree). I had my wife with me so she could retrieve arrows while i was experimenting with shot angle and almost straight down was not a problem. Just get out and find a nice tree at a comfortable height for you and see what you can and can't do with it. Once again it is a really well built sight and extremely tough. Good Luck,
YUKONBILL
I actually set mine for 20yrds on the ground and it will hit dead on at 30yrds, (15-30 ft. in a tree). I had my wife with me so she could retrieve arrows while i was experimenting with shot angle and almost straight down was not a problem. Just get out and find a nice tree at a comfortable height for you and see what you can and can't do with it. Once again it is a really well built sight and extremely tough. Good Luck,
YUKONBILL