OnTargt2 Shaft selector program
10-10-2007, 07:18 PM
#12
Typical Buck
Join Date: Feb 2003
Location: Nebraska
Posts: 760
RE: OnTargt2 Shaft selector program
I think you are doing something wrong , I put in for specs 64# 30% letoff, I believe this would be closer, 46 ATA brace height 9.75. I clicked off the release aid button because the way I took it you are shooting this bow with fingers. For the cams I put in there 2 cam soft. then the point weight and insert. Arrow length 30.5 , I wasnt sure what your draw length actually is so I put in there 30 inches . Anyway the 340's showed slightly heavy. Here is a snapshot of what OT2 showed.
10-11-2007, 08:07 AM
#13
Nontypical Buck
Thread Starter
Join Date: Feb 2007
Location: Nashville, Ohio
Posts: 1,109
RE: OnTargt2 Shaft selector program
Acher 2 that is sweet how you got that on here! the only thing i can see that is different than mine is the target box is clicked instead of the hunting box. i get the same thing when i click target but if you click the hunting box the 340 drops right doxn into the acceptable spine range.
