HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Technical (https://www.huntingnet.com/forum/technical-20/)
-   -   arrow flight (https://www.huntingnet.com/forum/technical/211155-arrow-flight.html)

okeechobeefishing 10-09-2007 04:31 PM

arrow flight
 
hi I'm a new bow hunter this year and have had pretty good success so far. Recently though I had 2in. blazers put on all my arrows and I noticed that there flight is not always straight. They still hit the target and have good grouping but don't always seem to fly straight almost like a fishtail in flight. May have always done this but just now have noticed it. any help with this. Thanks Jerry

millerhunter13 10-09-2007 05:28 PM

RE: arrow flight
 
it could be that the fletchings on those arrows are slightly warped or it could be the way you are griping your grip. it also could be punching the release.

2droptine 10-09-2007 06:12 PM

RE: arrow flight
 
You have to determine if this is caused by you or by equipment. Does it happen on every arrow or just some. Have you shot thru paper? Got a bullet hole? This is huge issue for you, because with out good arrow flight you will not get good penetration.

okeechobeefishing 10-10-2007 02:52 PM

RE: arrow flight
 
thanks i will check these suggestions out. thanks for helping

r33h 10-10-2007 03:11 PM

RE: arrow flight
 

ORIGINAL: 2droptine

You have to determine if this is caused by you or by equipment. Does it happen on every arrow or just some. Have you shot thru paper? Got a bullet hole? This is huge issue for you, because with out good arrow flight you will not get good penetration.
Also check and make sure that the blazer vanes aren't hitting your arrow rest. Blazer vanes have a higher profile (taller) than most other vanes and it could be that your vanes are contacting your arrow rest.

rrviper40 10-10-2007 07:42 PM

RE: arrow flight
 
not only your rest, also check contact with your riser. i have an older hoyt thatscenter shot is close enough to the riser that i wouldn't shoot blazers through it. im not positive they would hit but the regular vanes are cutting it pretty close as it is.


All times are GMT -8. The time now is 04:53 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.