How Could This Happen?
 

I had some work done to the bow a couple weeks ago....could not get broadheads to fly....went to the Pro Shop.....guy says I cannot use my whisker buisket.....it didn't fit...couldn't get true centershot...showed me with the laser tool?......so I had him put on my nap quick tune fork rest....I bought some new Montec's 100 grn......put them on my arrows..Maxima Hunter 250....and he had me shooting darts before I left....I am pleased with his work....still am......but now they are flying erratic again? I have not banged my bow or anything......I have switched the arrows with others from the same batch.....could this be it? Do I need a squaring tool? I figured if my bow is tuned, and arrows and heads come with .001 or whatever straightness....I should be able to shoot them straight? This is where this all gets confusing to me? Any Suggestions? Thanks

RE: How Could This Happen?
 

Not all inserts are created equal could be the arrow could be the insert, spin test all your arrows and use only those that spin true and show no erratic flight behavior. This goes without saying each broadhead may vary or after shooting get a slight bend in one of the blades it doesn't take much good luck fixen your problem

RE: How Could This Happen?
 

get good mechanicals if the heads are the problem, thats another thing people dont think about fixed heads. might shoot fine now but after practice how do they shoot. with my steelhead i just shoot field tips until the night before and screw them on. if your stuck on fixed heads check them after every practice spintest etc.

RE: How Could This Happen?
 

I have no problems with brodhead flight,they hit right with my fieldpoints.If you have a goodset up most of the time yu will not hvae problems with broadhead flight.You do need a helical flecht on your vanes to achieve perfect flight with bh

RE: How Could This Happen?
 

if he had good flight and now doesnt without changing anything, i was saying it could be his heads are bent. iwasnt saying that its just cause he uses fixed heads or anything like that, sorry if thats what i implied.

RE: How Could This Happen?
 

If you are having some arrows shoot good, and some bad....there is a difference in the arrows or the broadhead alinement, or even a fletching clearance problem requiring rotating your nock and realigning the broad head.....if none of your arrows are flying true now, andall of a suddent your flight is erratic, most likely your rest has moved or your string nock has slipped....describe erratic...are all the arrows doing the same thing? You should shoot every arrow you are planning to hunt with PRIOR to hunting and touch up your edges. The most common mistake a lot of archery hunters make is practice with the same 3 or 4 broadheads and hunt with brand new ones they have never even shot to insure broadhead sharpness.....I sent you a pm on the importance of broad head alinement for Montecs...Kirk

RE: How Could This Happen?
 

That isn't really solving the problem, just covering it. In a well tuned bow it shouldn't matter whether you shoot a field point, broad head or mechanical. They should all fly the same and group together.

Partsjay, how do your vanes look on the arrows? You mentioned that you are now shooting a fork rest. You will want to make sure that the nocks haven't turned and are causing the fletching to hit the arrow rest. This will definately cause erratic flight.

RE: How Could This Happen?
 

Is the new rest and tune the only work you had done, or did you get a new string and/or cables as well? If so, my first thought is string creep. If not, then I have to go with kirkll and say your rest or nockset have moved. Also, are you shooting it with exactly the same accessories that were on the bow when it was tuned or have you added a bow quiver or something else to the bow? Any changes like that can have a drastic effect on tune.

RE: How Could This Happen?
 

Did you ry shooting broadheads at the shop? Did you try shooting field tips at home? What is the draw weight of the bow and the length of the arrows, etc. It's possible the arrows are underspined. If this is the case you could show a good paper tear at the shop and good flight at home with filed points andthen put broadheads on and the flight goes to hell.

Paper tuning is pretty much just basic tuning. It shows how the arrow is leaving the bow. Not what it's doing down range. If you're going to shoot broadheads then you should broadhead tune as per Easton's Tuning Guide.

Could be that you are torquing the bow at home, too.

RE: How Could This Happen?
 

[quote]ORIGINAL: JeramyK

everyone is so quick to yell at the suggestion of mechanicals. the guy said his bow is tuned thats why i said shoot mechs with good ones you dont have to worry about damage from practice just shoot them only to hunt. with broadheads that last shot into the target might have bent the blades and youd never know until you shoot it at an animal.

RE: How Could This Happen?
 

In his post I could see no where he said his bow was tuned. He did say, "I figured if my bow is tuned". "if" is a critical point. In fact, reading it, you can tell he doesn't know. A good tune can only be confirmed by bareshaft tuning or broadhead tuning at the range. I don't see where he said either of these has been done. I have to agree with the others, using a mechanical to cover a tuning problem is not a good idea. In order to help him, we need a lot more info about his arrows and his setup. If spine and FOC are acceptable, then he has to start looking at the tuning process and for little things like spinning broadheads. I would bet that he would be greatly helped by downloading Easton's tuning guide and carefully following all the steps.

RE: How Could This Happen?
 

I got it guys...Thank You......fora weekI have been trying to restrain from touching anything on my bow.....
my bow is in tune...I was just a little flustered while I was writing the original post.....just wasn't sure why it was happening, but it was me all along....which is why I didn't want to touch my bow because I was shooting so well before....took my Dad 2 seconds to tell me what I was doing differently...I just didn't realise it.....
Sometimes you just have to go back to basics.....problem solved...Thanks Again!

RE: How Could This Happen?
 

What was the problem?

RE: How Could This Happen?
 

Honestly.....I wasn't using my correct anchor points......I normally have my bow string just touching my nose....I was pushing it too far.....

RE: How Could This Happen?
 

"In a well tuned bow it shouldn't matter whether you shoot a field point, broad head or mechanical. They should all fly the same and group together."

IMO.... this is a bogus statement.....rotating your broadheads all the same makes a difference on the flight of your arrowusing afixed blade broad head, ina 3 blade ora 2 blade espeacilly. The 4 blade heads are not so noticeable..... You are putting wings on the front of that arrow guys! It DOES make a difference.....try taking off in a well tuned airplane with one flap up, and the other one down.....It ain't going to fly so well.....Kirk