HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Technical (https://www.huntingnet.com/forum/technical-20/)
-   -   How to tie in nocksets and a D-loop (https://www.huntingnet.com/forum/technical/196301-how-tie-nocksets-d-loop.html)

Crazyfarmer 09-25-2008 04:47 PM

RE: How to tie in nocksets and a D-loop
 
thanks for the post... My loop broke that the shop had put on and instead of going back, spending 10-20bucks there it costed me a whole 2 dollars worth of string. Even got the loop shorter which made drawing easier and shoots better if you ask me.

william10 09-25-2008 11:29 PM

RE: How to tie in nocksets and a D-loop
 
great info...and photos..

earlly 10-15-2008 07:55 PM

RE: How to tie in nocksets and a D-loop
 
Greg, where can I order the R.S. String Level Combo kit? And thanks for sharing your skills with us.

earlly

Greg / MO 10-15-2008 08:33 PM

RE: How to tie in nocksets and a D-loop
 
Thanks, earlly... my pleasure.

$17.99 from Cabela's... http://www.cabelas.com/cabelas/en/templates/product/standard-item.jsp?_DARGS=/cabelas/en/common/catalog/item-link.jsp_A&_DAV=MainCatcat21424-cat600814&id=0020286415940a&navCount=1&amp ;podId=0020286&parentId=cat600814&masterpa thid=&navAction=push&catalogCode=QX&ri d=&parentType=index&indexId=cat600814& hasJS=true

Cougar Mag 03-12-2009 04:14 AM

RE: How to tie in nocksets and a D-loop
 
I've tied string loops for a while now but first time I ever tied on nock points. Mine seem to be tight and uniform although I didn't use any dental floss to bring the thread back through under itself. Seemed to work ok without the floss. But I want to take this opportunity to thank Greg for posting this great information. Couldn't have tied the nocks without it. Good job Greg!!!!

tom v 05-13-2009 12:57 AM

RE: How to tie in nocksets and a D-loop
 
Greg, Great post very well done all the way around!!

killzonearchery 09-01-2009 12:02 PM

i still cant do it yet. ill figure it out one day

OtisWinkerbean 10-24-2009 07:47 PM

Tie in a nockset and D-Loop
 
EXCELLENT depiction of a previously abstract concept - Thank You!
.
Successful effort on my 1st try YehHah... I too ended up removing the tied D-loop and burning the second ball end off bow to assure that I did not burn (another) string set.
.
For future consideration I measured it and I actually used a 4" length measured after the melted tip (no Flame) ball ends were fashioned.
.
I used a brass nock to define the high mark of the nocking point with the D-loop below the nock and above the arrow. The lower leg was pulled up snug below the arrow as I pulled it tight with my release and opposing hand followed eventually by a few dozen test shots to settle the string.

I also re-tied my peep using a variation of your nocking point technique which seems to be working very well indeed.

Knowledge is confidence and you have given this community a gift that MANY ARE SURE TO APPRECIATE.

Thank you!

NITEHAWKJS 01-29-2010 10:22 AM

Good deal! Thanks Greg

jaywalker 01-30-2010 10:17 AM

Thanks for your time and effert, it will prabably help me fix my bow.


All times are GMT -8. The time now is 12:40 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.