FOC
07-02-2007 | 10:38 AM
#2
Giant Nontypical
Joined: Feb 2003
Posts: 9,175
Likes: 0
07-02-2007 | 12:07 PM
#3
Giant Nontypical
Joined: Feb 2003
Posts: 8,317
Likes: 4
RE: FOC
Check out this image....
Let's take my arrows as an example:
Beman ICS Hunter 340's (regular stockarrows,right out of the box)
Cut length: 29.25" ("TAL" in the image above)
Balance point: 17.8125" ("APB" in the image above)
Field tips/broadheads: 100 grain
(17.8125 / 29.25) - .50 X 100 === 10.89% FOC
Arrow FOC as per OnTarget2 software: 10.68 %
I got very close to OT2's figure, as I went a little extreme, and used a piece of fishing line tied around the arrow and found the balance point, that way.
Butch A.
Let's take my arrows as an example:
Beman ICS Hunter 340's (regular stockarrows,right out of the box)
Cut length: 29.25" ("TAL" in the image above)
Balance point: 17.8125" ("APB" in the image above)
Field tips/broadheads: 100 grain
(17.8125 / 29.25) - .50 X 100 === 10.89% FOC
Arrow FOC as per OnTarget2 software: 10.68 %
I got very close to OT2's figure, as I went a little extreme, and used a piece of fishing line tied around the arrow and found the balance point, that way.
Butch A.
