Allegiance Issues...
#61
RE: Allegiance Issues...
ORIGINAL: Washington Hunter
According to paper or your groups? Personally, I don't paper tune, I group tune.
I agree as I've had bows that I grouped tuned at 40 yards and they would shoot nice tightgroups, thenI would shoot them through paper just for kicks and itindicated I had anill-tuned bow.
It hasn't been fixed, the bow still isn't tuned properly.
All this proves is that paper tuning can cause more headaches than its really worth.
#63
Nontypical Buck
Join Date: Feb 2007
Location: Balt, MD (orig: J-town,PA) The bowels of Hell!!!
Posts: 2,188
RE: Allegiance Issues...
In French tuning you know your bow is tuned and dead on from 0 to 50 to 55 yds. That gives me more confidence than shooting a piece of paper at 5 or 10 yds.
#64
RE: Allegiance Issues...
why would i french tune when i have trajectory charts? and use computer programs for precise tapes for slide barsor pin gapping on a hunting sight? just curious. just as another way to find center shot?
#65
Nontypical Buck
Join Date: Feb 2007
Location: Balt, MD (orig: J-town,PA) The bowels of Hell!!!
Posts: 2,188
RE: Allegiance Issues...
Good question gibblet.
Yes, it's main purpose is for tuning the rest. I've always usedpaper tuning anddecided to give it a shot after reading an article. I found it more enjoyable and much easier to do than paper. For one you find out faster if the changes you are making in your rest are working. The second reason is that you get to practice at alonger range.
It also adds to practice in the fact that you have to sight in your bow dead on at a small target. and by dead onI mean you are hitting an eraser sized target. So, you have to concentrate on a very small target.I think sometimes when shooting at longer distances people sometimes shoot at a large target area, not a precise point. this sort of tuning now makes me focus on small spots like previous arrow holes as targets instead of the whole ring.
I was not indicating that it replaces any of the things you have listed. It's not a way to set gaps or for trajectory charting.I use the PC programs for the same reasons you are stating. I actually used the PC program to figure out the closerange to stand for French tuning. Since I know there is a 53 yd marker on my rangeI just plugged in that as my aim point in OnTarget and it shows me the range to stand close.
Yes, it's main purpose is for tuning the rest. I've always usedpaper tuning anddecided to give it a shot after reading an article. I found it more enjoyable and much easier to do than paper. For one you find out faster if the changes you are making in your rest are working. The second reason is that you get to practice at alonger range.
It also adds to practice in the fact that you have to sight in your bow dead on at a small target. and by dead onI mean you are hitting an eraser sized target. So, you have to concentrate on a very small target.I think sometimes when shooting at longer distances people sometimes shoot at a large target area, not a precise point. this sort of tuning now makes me focus on small spots like previous arrow holes as targets instead of the whole ring.
I was not indicating that it replaces any of the things you have listed. It's not a way to set gaps or for trajectory charting.I use the PC programs for the same reasons you are stating. I actually used the PC program to figure out the closerange to stand for French tuning. Since I know there is a 53 yd marker on my rangeI just plugged in that as my aim point in OnTarget and it shows me the range to stand close.
#68
RE: Allegiance Issues...
ORIGINAL: gibblet
i thought the french method was to throw your bow on the ground, raise a white flag, and then send someone a statue LOL.
(this is ausie's joke: credit where credit is due)
i thought the french method was to throw your bow on the ground, raise a white flag, and then send someone a statue LOL.
(this is ausie's joke: credit where credit is due)
John.
You forgot the part about peeing the pants