modified my press,finally
03-01-2007 | 09:48 PM
#1
Thread Starter
Giant Nontypical
Joined: Feb 2003
Posts: 6,634
Likes: 0
From: HENDERSON KY USA
modified my press,finally
Well,now I can press those parallel things.
I have been threatening to do this for a while,just never had a round tuit.[
]
Finally got my but in gear and got er did.
I took pictures during the process.
I have been threatening to do this for a while,just never had a round tuit.[
]Finally got my but in gear and got er did.
I took pictures during the process.
03-03-2007 | 06:00 AM
#3
Boone & Crockett
Joined: Feb 2003
Posts: 12,157
Likes: 0
From: Lehigh County PA USA
RE: modified my press,finally
Nicely done TFOX. I wish I had those skills. My neighbor is a welder and I have an older style press here at home.
It would probably cost less than going out and buying the Apple version or an Xpress now wouldn't it?
Speaking of buying a new parallel limb bow........
It would probably cost less than going out and buying the Apple version or an Xpress now wouldn't it?
Speaking of buying a new parallel limb bow........
03-03-2007 | 10:43 AM
#4
Thread Starter
Giant Nontypical
Joined: Feb 2003
Posts: 6,634
Likes: 0
From: HENDERSON KY USA
RE: modified my press,finally
Cost is MUCH less,about $450.00 less.[]
It has been pointed out to me that I MIGHT have some problems pressing some parallel bows due to the extreme angle of the posts.They might hit the limb pockets,if that is a problem,I might have to cut the post off andthen reatach at a little less angle.That really isn't that big of a deal.If you decide to do it,that might be something to look at.
]It has been pointed out to me that I MIGHT have some problems pressing some parallel bows due to the extreme angle of the posts.They might hit the limb pockets,if that is a problem,I might have to cut the post off andthen reatach at a little less angle.That really isn't that big of a deal.If you decide to do it,that might be something to look at.
03-03-2007 | 08:32 PM
#7
Thread Starter
Giant Nontypical
Joined: Feb 2003
Posts: 6,634
Likes: 0
From: HENDERSON KY USA
RE: modified my press,finally
Look at the jack,that wasn't there before.It was a standard press before.
Look at all the pictures,I know the quality isn't that good.
I quess it looks factory.I quess that it is good.
Look at all the pictures,I know the quality isn't that good.
I quess it looks factory.I quess that it is good.
