Not worth a D...............
 

ollar! never mind $ 32.99 from Cabelas. got it, tried it and boxed it right back up. The magnet is a pain in the rear to adjust so that you get good fletching contact. I’m sticking with my E-Z Carbon Pro. just my two cents for what it's worth!



Bo

RE: Not worth a D...............
 

Really? I love mine.

RE: Not worth a D...............
 

MB, you didn't have any issues with it at all?

Bo

RE: Not worth a D...............
 

dont have any with mine either works good for me

RE: Not worth a D...............
 

I tried a Grayling, and there was simply too much slop in the mechanism. I finally bit the bullet and bought a Bitzenburger. I think I'll pass it on to my grandkids... ;):)Seriously, do yourself a favor and just buy one. [8D]

RE: Not worth a D...............
 

No, none.....I use the Bitz at the shop I work at, and honestly it works just as well. I hear an aweful lot of "Bitzenburger this, and Bitzenburger that....." Yes, the Bitz is a great jig, no question.....I simply CANNOT see spending 70 bills when the grayling is less than half that and works equally as well.

I've used my Grayling for 3 years now, and fletched.......I couldn't even tell you how many arrows. Not one single issue have I had that wasn't my fault...Stupid mistake so to say.

RE: Not worth a D...............
 

Thanks all for your replies! I'm with GM on this one....sloppy and the clamp "fletching Edge", where the fletching sits was all uneven, had to use a little sand paper to get the vanes to sit flush on the clamp. Mine was just poorly put together I guess. Any way, thanks again!

Bo

RE: Not worth a D...............
 

I agree with mobo, I have been using a greyling for several years and haven't had any major issues with mine. The only thing I did have a minor issue with was the fact thats its a plastic and you have to becareful if you need to scrape any glue from the jig. Other than, it works well.

I'll probably eventually pick up a bitz just for the reason above.

RE: Not worth a D...............
 

I had one of those pieces of crap and it wouldn't work for me either. I tried it literally hundreds of times with many different glues and couldn't get it. I bought the Arizona EZ Fletch and love it. It works great for me.

that's my two cents

RE: Not worth a D...............
 

My dad has a Bitz.. and my brother has one of those EZ fletchers... we both usually just get together and either go to Dad's and use his or we steal it and do our houses. I love the damn thing, and he has owned his rig since I was in diapers... It is well worth the money!