I'm thinking about switching to these anyone using them?
Which ones should i go with 250 or 350?
Heres my set-up
AR31 ram and ahalf
67lbs 28" draw
Arrows will be 26.50"
75 grain head
Blazer vanes
4" wrap
If i go with the 250's my arrows will way about 336 grains
and the 350's will be like 358 grains!

With the short arrows you are shooting youshouldnt have any issues with the 250 but personally i would use the 350.. Walt

I'm shooting the 250's out of a 68 lb. Pearson Edge,29" draw.My arrows from the end of the nock to the tip of the broadhead are exactly 30" long.I have these things flying like darts.Broadheads and fieldtips group perfectly together.

I switched to them this year....I love them...250 hunter with 100 grain NAP thunderheads....Hoyt Magnatec....very nice arrow.

I use the Maxima 250's and the CX200's out of my bow. Both fly like darts. I do not see any real difference between the two other than the carbon fiber weave look on the Maxima's and the price.

Brox,
If you have a 28" draw why the 1 1/2" shorter arrow? I have a 26" draw at 70#and my arrows are 26.5". Wouldn't that bring your arrow back way past your riser? I'm not that technically sound on this stuff but it just sounds odd. Anyone else who would be able to enlighten me on this???

I have 28" draw modules on my ARon the middle post which is 28 even and my arrows arealittle over 26.5" from nock groove to insert and they sit right in the middle of theriser window cut out.Maybe the module and the bow was marked wrong? I have wondered that myself?

I see said the blind man. Thanks for setting me straight. Good shooting

cx edge 350 is a good arrow too thats what i shoot

My Maxima Hunters 250'sare in the mail.Can't wait to get them!!!