Bearings
 

I have had two sets of bearings go out on my compound in a month (shooting maybe 1000 shots in that time frame). Of course they don't have roller bearings, they have crappy ball bearings.

So I look for better bearings, which cannot really be found. Then I get to thinking, what is the bearing doing anyway? The axle is not pressed into the cam, so the bearing is not even working. It's acting like a bushing. So I get some bronze, mill out a solid peice for my cams.

I got another set of bearings to put into the bow, and shot it over the speed meter at 290. Changed the bearings out to the bushings, and shot it through the chrono at 290. Another marketing gimmick by the bow companies.

RE: Bearings
 

Hmm, there's something to ponder.
Pics to support your theory would sure had been nice for me too look at, did you take any?

Not to change the subject, but I'm not sure there are any bushings on my Binary cammed Tribute, the limb to cam clearence on those babies are TIGHT, I doubt you could slide a buisnees card in there. I wonder if they are actually rolling on the bearings on those cams?

RE: Bearings
 

Ewolf see if you can read the numbers on the bearings and post. A freind works in a bearing store maybe he can find some thing in that size, but in needle bearings. Rich

RE: Bearings
 

DaveC I pressed the bearings out and replace with a solid piece of bronze with a hole for the axle. I wll try and get the numbers off of the bearings once I get back in town.