HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Technical (https://www.huntingnet.com/forum/technical-20/)
-   -   What is the best fletching jig for a amateur (https://www.huntingnet.com/forum/technical/116528-what-best-fletching-jig-amateur.html)

gonzodemon 10-14-2005 01:09 PM

RE: What is the best fletching jig for a amateur
 
get yourself an arizona ez fletch. it does all three fletches at once and its small and compact. you dont need a table to set it up. i can do a dozen arrows in less than ten minutes. i have never had one minutes problem. i use the arrows i fletch in tournaments as well as hunting and have taken home many trophies. the others are all excellent but for sheer ease of use try the arizona. they only cost about thirty bucks and you can get a carbon or an aluminum shaft version but with todays fatter carbon shafts i use the aluminum on all. if you shoot the super slim shafts use the carbin. for the price you can buy both cheaper than you can get one bitzenburger that only does one fletch at a time.

Winger 10-16-2005 06:54 AM

RE: What is the best fletching jig for a amateur
 

ORIGINAL: Kathwacckkk

I am also looking at purchasing a Bitz. Question I have: Do most of you re-fletch arrows that were store bought and already cut & fletched and just need new fletchings?Or do you start with bare shafts? I cannot seem to find a carbon arrow saw for a resonable price that would allow me to start with bare shafts.
Thanks.
Both ... I make all my new arrows and refletch quite a bit, as I am anal about my fletchings. Most places I deal with will cut the shafts to length when they are purchased for no additional charge. I would think most any shop would cut them for at most a minimal fee. I think even mail order places will cut shafts to length and install inserts for a small charge. I own an arrow cutoff saw and cut my own, but I think I could get by without it.

Dubbya 10-16-2005 09:19 PM

RE: What is the best fletching jig for a amateur
 
Definitely get a Bitz, these things are super solid construction and will last FOREVER. Also I'm going to give another piece of advice, toss the vanes in the can and get some feathers. Good luck with your decisions.

Greg / MO 10-16-2005 09:28 PM

RE: What is the best fletching jig for a amateur
 
... and get barred feathers; they just look cooler! ;):D

Gadeerslayer 10-17-2005 11:52 AM

RE: What is the best fletching jig for a amateur
 
Well after reading all the post, I'm going with the Bitzenburger. Thanks for all of your inputs...

Winger 10-17-2005 12:37 PM

RE: What is the best fletching jig for a amateur
 
You will be glad you did;)


All times are GMT -8. The time now is 03:32 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.