Just a quick question, I'm shooting 5575's at 25" right now and wondered if going up to 7595's would be too stiff. Any opinions?

I would think so being that 28-29 inches is the cut off at your draw weight. I found that with a 29" arrow I needed the 7595 at 70#. Now I shoot 66# and a 28" arrow and it shoots great. The worst thing you could do though is try one and see how it goes but I would guess it is to stiff for your setup.

I shoot those arrows, a little longer draw then you. But I am only pulling 62lbs.
You should be just fine! And you'll get some more weight!

I'm shooting the 75/95's cut at 29.5" with a 125 grn pt and they're working great. I went with this shaft for the extra weight, and I just cut them long so that the spine works out. You could easily do the same if you're looking to shoot a heavier arrow.