Need help reserving a bowstring
 

I'm reserving my bowstring myself for the first time. I am running in to trouble having enough room to spin the serving jig around the string when i get to my cable guard rod that sticks out. The rod is about an inch and a half above my nocking point so its pretty important that i fletch a little past the rod. Any suggestions on what I might be doing wrong?

RE: Need help reserving a bowstring
 

Two ways to go about this, strike that, make it three.

You can remove the cable guard.

You can utilize one of those string/cable seperators (one is called the "U-serve-it". They push the string up away from the cables and cable guard.

Or you can pull out some extra serving, and wrap it by hand through that section. Wrapping the string below the guard, and then pushing it up to meet.Just make sure to keep the tension consistant bytugging on it a few times. Begin using the serving tool as soon as you can, and finish it out from there.

Hope this helps, have a good one---Matt:)

RE: Need help reserving a bowstring
 

You should put it in a bow press and slack it up just a little if possible. At any rate, you can make your own string and cable seperators if you have an old arrow of any kind and four nocks. Cut two 6-8 inch pieces from the arrow and put nocks in each end of each piece. Then put those on the sting and cable (like you would nock an arrow)to seperate you string and cable to give yourself room to work and space them however far apart you want to serve.

RE: Need help reserving a bowstring
 

Great tip! Thats an interesting way to utilize broken arrows!

RE: Need help reserving a bowstring
 

I'm not sure if you want to do this. Once the string is retensioned, the serving could separate. I think it's best to simply wrap with a little slack in the serving tool, once you get to the cable guard. Brownell makes a product called Liquid Lok that helps keep the serving from separating.

RE: Need help reserving a bowstring
 

Well I took snood's advice and made a couple seperaters out of an old arrow and it worked great. Now I'm back in business.