Annealing machine?
Does anyone here use a special purpose machine when/if they anneal brass?
|
I have used various annealing machines for years. The Benchsource was the first I had. I built my own Annealeez, then bought a Giraud, upgraded that with an Annie induction annealer after piloting my own induction coil, and most recently bought an AMP + Amp Mate.
Induction annealing is the “bee’s knees.” Most consistent method, and the automated feeding process means I can set up the machine and have my hands free to do other tasks in my workshop while it does its job. |
I am thinking about an induction machine like the Annie. The auto feed device would be great for high volume but I will use it manually for my purposes. The machines keep getting better and the prices keep rising.
|
AMP (Annealing Made Perfect) makes a nice induction one for just under $200. Pretty nifty one without the use of gas. https://www.ampannealing.com/
|
Originally Posted by bronko22000
(Post 4370384)
AMP (Annealing Made Perfect) makes a nice induction one for just under $200. Pretty nifty one without the use of gas. https://www.ampannealing.com/
The Giraud auto feeder for the Annie is a huge advantage - otherwise you can end up introducing inconsistency in your exposure time. |
Originally Posted by Nomercy448
(Post 4370393)
I think you missed a Zero. I’d have 4 AMP’s instead of just one if they were only $200!
The Giraud auto feeder for the Annie is a huge advantage - otherwise you can end up introducing inconsistency in your exposure time. Overall how did you like the Annie unit? The price of roughly $600 (with coil and cooler) seems fair enough - if it is a good machine. |
Distance from the coil is critical, plus, the coil does get quite hot. The consistency in position and the ability to consistently drop the cartridge from the coil gap. Any induction annealing is better than any flame annealing, but the automated feeder does improve the process.
Nothing wrong at all with the Annie, and with the Giraud feeder, a guy has options - go induction or go gas flame. I just wanted a little more speed in set up and the precision/adaptability of the Aztec mode to perfect my cycle time. Using a case feeder and the amp mate on an AMP, a guy can dump cases in the feeder and walk away. The Giraud feeder has to have cases oriented in the hopper. Not a big deal, but it’s a difference. |
I appreciate the information and opinion. Thanks much.
|
Originally Posted by Nomercy448
(Post 4370393)
I think you missed a Zero. I’d have 4 AMP’s instead of just one if they were only $200!
The Giraud auto feeder for the Annie is a huge advantage - otherwise you can end up introducing inconsistency in your exposure time. |
I have an AMP annealer. These things are awesome and well worth the money IMO.
|
All times are GMT -8. The time now is 10:20 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.