Need help for a new hobbie of reloading!
#21
Typical Buck
Join Date: Oct 2004
Location: Indiana county, Pa
Posts: 681
starting off with a single stage press is a good idea. until you are more familiar with reloading, id stay away from progressive press's. id look at an RCBS kit that includes a rockchucker press and has most of the things you will need to get started. also get different loading manuals for the bullets you will be using. might I suggest Hornady's manual as it has a lot of info on reloading and gives you terminology you need to understand about reloading. also deal with someone that knows reloading at the store you deal with. also look up price on the internet to get an idea of how much different places are selling their kits for. good luck and have a safe experience with reloading.
#23
Another good manual is Modern Reloading. http://leeprecision.com/modern-reloading-book/
It gives you clear concise step by step instruction.
It gives you clear concise step by step instruction.
#24
Nontypical Buck
Join Date: Aug 2014
Location: gilbert az
Posts: 1,168
yeah i see someone said be safe i would second that and whatever you do is don't get distracted focus on what your doing and look in each case before you seat the bullet to make sure you have powder in there you don't want to forget it !!
#25
That right there is why I seriously never recommend progressive style presses to beginners. All to easy to miss an extra charge amount in the case. I have several single stage presses and can easily load up 200 an hour after case prep. Mercy's lathe style case trimmer suggestion is as spot on as one can get. Accurate case length can be the rise or fall of a well crafted load. And one thing you NEVER want to "skimp" on is your scale! A high quality scale will not only aid you with accurate loads, but SAFE loads as well. Calibrate and test your scale often for safety.
#26
Nontypical Buck
Join Date: Aug 2014
Location: gilbert az
Posts: 1,168
That right there is why I seriously never recommend progressive style presses to beginners. All to easy to miss an extra charge amount in the case. I have several single stage presses and can easily load up 200 an hour after case prep. Mercy's lathe style case trimmer suggestion is as spot on as one can get. Accurate case length can be the rise or fall of a well crafted load. And one thing you NEVER want to "skimp" on is your scale! A high quality scale will not only aid you with accurate loads, but SAFE loads as well. Calibrate and test your scale often for safety.
#28
Standby - I expect him back soon.