Can I do better
#1
I dusted off my Weatherby Vanguard Deluxe Sporter been awhile since I shot it and haven't tried many types of ammo in it yet. I decided to try and see if it liked some lighter weight ammo. Up until now I had shot some 180gr. Federal Premium bonded ammo that I was barely able to keep in three shots in 2.5in. Also some 180gr CT Ballistic Silvertips that will go three shots for 1.125in. Today I tried some 165gr. Rem core-lokt. 5 shot at around 1.125in.
Can I do better with some handloads? Or is this about as good as it gets? I'm just using sandbags off a bench and i'll admit I couldn't get a perfectly solid rest...need some different size bags. I'd be happy with 5 shots under an inch. Thinking about having my father load me up either some 165gr. core-lokt or some 168gr CT Ballistic Silvertips.
Can I do better with some handloads? Or is this about as good as it gets? I'm just using sandbags off a bench and i'll admit I couldn't get a perfectly solid rest...need some different size bags. I'd be happy with 5 shots under an inch. Thinking about having my father load me up either some 165gr. core-lokt or some 168gr CT Ballistic Silvertips.
Last edited by sixgunluvr; 07-02-2010 at 07:40 PM.
#2
Typical Buck
Joined: Feb 2010
Posts: 857
Likes: 0
From: central florida
Thats ok for a hunting rifle by all means. Test some other loads though if you want tighter groups. Try lowering your powder charge some as the hottest loads arent always the most accurate. If different loads dont help some minor smithing may be necessary.
#3
Nontypical Buck
Joined: Oct 2004
Posts: 1,085
Likes: 0
For us mere mortals, that's a pretty durn good 5 shot group...
It's excellent hunting accuracy... Unless you are shooting benchrest for smallest group size,or perhaps shooting at very longe range , its actually better than you need for deer size or larger game out to 400 yards or so, which is as far or farther than most of us want to take a shot...
If it shoots that good with factory loads, an experienced handloader could no doubt work up sub MOA loads for your rifle, but strictly from a hunting standpoint, I'd take those factory loads and go hunting any old day...
It's excellent hunting accuracy... Unless you are shooting benchrest for smallest group size,or perhaps shooting at very longe range , its actually better than you need for deer size or larger game out to 400 yards or so, which is as far or farther than most of us want to take a shot...
If it shoots that good with factory loads, an experienced handloader could no doubt work up sub MOA loads for your rifle, but strictly from a hunting standpoint, I'd take those factory loads and go hunting any old day...
#4
Nontypical Buck
Joined: Feb 2003
Posts: 3,393
Likes: 0
From: Western Nebraska
I've only had one rifle that shot better with factory ammo over any handloads....a .225 Winchester in 1965.....
1 1/8" groups aren't bad at all.....but you should be able to improve on it....if it's worth it to you.
You didn't say what cartridge but if it's a .30-06 you probably can add 100-200 FPS and retain the accuracy by handloading.....and at less cost than factory stuff!
1 1/8" groups aren't bad at all.....but you should be able to improve on it....if it's worth it to you.
You didn't say what cartridge but if it's a .30-06 you probably can add 100-200 FPS and retain the accuracy by handloading.....and at less cost than factory stuff!



