Community
Reloading Share techniques for reloading, where to get the hottest in reloading equipment and learn how to reload from fellow hunters.

what powder for a 25-06?

Thread Tools
 
Old 10-26-2009 | 03:30 PM
  #11  
Typical Buck
 
Joined: May 2003
Posts: 920
Likes: 0
From:
Default

From a 100yd zero, that load is appx 19,36 and 60 inches low repectively at 300,400 and 500 yards.
doubleA is offline  
Reply
Old 10-26-2009 | 04:46 PM
  #12  
Big Z's Avatar
Nontypical Buck
 
Joined: Sep 2009
Posts: 1,455
Likes: 0
Default

Varget's what I use. I don't load my 25-06 very hot, it's fine with lighter loads and a bit easier on the gun.
Big Z is offline  
Reply
Old 10-26-2009 | 07:33 PM
  #13  
Fork Horn
 
Joined: Oct 2009
Posts: 113
Likes: 0
From: NC
Default

I also like IMR powder in my 25. I do want to try some R19 though.
Dan480Man is offline  
Reply
Old 10-27-2009 | 06:56 PM
  #14  
skeeter 7MM's Avatar
Giant Nontypical
 
Joined: Feb 2003
Posts: 6,921
Likes: 0
From: Saskatchewan Canada
Default

Using RL22 now with 110gr AB's. I had success with IMR 4350 & 4831 as well with 100-115gr bullets. Haven't needed to try very hard to get the 700sps shooting MOA or better(well needed a trigger job of course), it seems to be a easy going rifle at this point any way.
skeeter 7MM is offline  
Reply
Old 11-01-2009 | 03:17 AM
  #15  
Pioneer2's Avatar
Typical Buck
 
Joined: Feb 2007
Posts: 692
Likes: 0
From:
Default

54gr of either RE22 or H4831 SC and a 120gr Hornady or 115 gr Partition.Deer.black bear and elk have all been put to sleep .As stated before Fed mag primers............Harold
Pioneer2 is offline  
Reply
Old 11-10-2009 | 01:08 PM
  #16  
JoeA's Avatar
Nontypical Buck
 
Joined: Feb 2003
Posts: 2,924
Likes: 1
From: Monticello, FL USA
Default

"Reloader 22 or IMR 4831 work great in the 25 06. I always use a magnum primer as well."

Hey redgreen...my reloading manual specifically recommends that magnum primers should only be used for powders marked for them, like Win. 296.

Maybe I'm misunderstanding something, but I've had good performance with regular rifle primers with IMR 4831, 4350, 4895, and Reloader 19, 22 shooting different calibers: 30-06, .270, 7.62 X 54R, and .308
JoeA is offline  
Reply
Old 11-11-2009 | 12:36 AM
  #17  
HighDesertWolf's Avatar
Nontypical Buck
 
Joined: Jun 2004
Posts: 3,171
Likes: 0
From: A flat lander lost in the mountains of Northern,AZ
Default

from my experience IMR4350 is hard to beat
HighDesertWolf is offline  
Reply
Old 11-11-2009 | 03:28 AM
  #18  
klundin2000's Avatar
Fork Horn
 
Joined: Aug 2009
Posts: 128
Likes: 0
From: Hudson, Wisconsin
Default

I also have a Remington 700.

I've had my highest velocities and best accuracy with AA3100. I'm shooting Barnes 100TSX 0.050 off the lands. I'm getting 3450fps and 1/2 MOA. This combo is smoking on deer...and coyotes for that matter. kl
klundin2000 is offline  
Reply
Old 11-11-2009 | 05:47 AM
  #19  
Swampdog 's Avatar
Nontypical Buck
 
Joined: Feb 2003
Posts: 2,324
Likes: 0
From: Danville Va. U.S.A.
Default

My Sako AV loves a max load of rl 22 with a 117 grain pill.This combo gives me my best grouping.Ialso have been fooling around with some IMR 4350 and getting some pretty good results.
Swampdog  is offline  
Reply
Old 11-11-2009 | 12:28 PM
  #20  
HighDesertWolf's Avatar
Nontypical Buck
 
Joined: Jun 2004
Posts: 3,171
Likes: 0
From: A flat lander lost in the mountains of Northern,AZ
Default

Originally Posted by Swampdog
My Sako AV loves a max load of rl 22 with a 117 grain pill.This combo gives me my best grouping.Ialso have been fooling around with some IMR 4350 and getting some pretty good results.


Imr 4350 just seems to be a natural performer in large capacity smaller caliber cartridges like the 25-06 it works real well in the 270 aswell seems almost like it was made especially for these cartridges
HighDesertWolf is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.