Which Press to buy?
05-15-2003 | 05:48 PM
#1
Thread Starter
Joined: Feb 2003
Posts: 28
Likes: 0
From: Oil City Pa USA
Which Press to buy?
Ok ya' ll which is it, the RCBS Master Rock Chucker, or the Lyman set. I will really just load .243 and .270 on it. Also what kind of Tumbler should I get? Now I have used a RCBS before but if I am not mistaken I do believe that Lyman Dies are cheaper, or they were last time I checked. Oh well which ever gets the most votes is the one I will go with.
05-15-2003 | 10:08 PM
#2
Nontypical Buck
Joined: Feb 2003
Posts: 3,516
Likes: 0
From:
05-17-2003 | 09:35 PM
#4
Nontypical Buck
Joined: Feb 2003
Posts: 2,929
Likes: 0
From: Oakland OR USA
RE: Which Press to buy?
RCBS and a midway tumbler is what I use . My tumblers are about eight years old and the only problem I have ever had is one of them wore a hole in the bowl I had used it so much .
05-18-2003 | 05:33 AM
#6
Nontypical Buck
Joined: Feb 2003
Posts: 3,393
Likes: 0
From: Western Nebraska
RE: Which Press to buy?
yup.....Reloading is spelled RCBS......all the way
all the vibratory bowls (tumblers) are made by one company and sold thru many different companys.....IE Midway' s is the same as Dillons is the same as Hornady' s etc
all the vibratory bowls (tumblers) are made by one company and sold thru many different companys.....IE Midway' s is the same as Dillons is the same as Hornady' s etc
05-20-2003 | 01:48 PM
#10
Fork Horn
Joined: Feb 2003
Posts: 443
Likes: 0
From: Bar Harbor ME USA
RE: Which Press to buy?
Lee Chalanger Press ( comes with the anniversary kit) works well if you are on a budget. I bought mine years ago and although I' ve considered many times to upgrade to an RCBS press couldn' t justify the expence when this one works so well. Don' t skip on the scale, get a good one. In my opinion it' s the most important piece of equipment you' ll buy. I' ve used lots of dies and I' ve had good results with lee dies too.
