HuntingNet.com Forums

Page 2 of 2

Show 40 post(s) from this thread on one page

HuntingNet.com Forums (https://www.huntingnet.com/forum/)

- Reloading (https://www.huntingnet.com/forum/reloading-15/)

- - Brass Life (https://www.huntingnet.com/forum/reloading/280419-brass-life.html)

TUK101

12-29-2008 10:30 PM

RE: Brass Life

Which Federal brass where they using though? The thick military stuff, or the consumer stuff? The military stuff is supposed to be thicker and pretty much top of the line. They probably used the consumer end stuff since the military would have been once fired.

bigcountry

12-30-2008 06:44 AM

RE: Brass Life

Quote:

ORIGINAL: TUK101

Which Federal brass where they using though? The thick military stuff, or the consumer stuff? The military stuff is supposed to be thicker and pretty much top of the line. They probably used the consumer end stuff since the military would have been once fired.

They tested fed military, plated, and "plain". The plain faired the best. The military failed almost last behind norma.

bigcountry

12-30-2008 06:46 AM

RE: Brass Life

Quote:

ORIGINAL: Ridge Runner

nosler, which is junk, no consistancy at all, and cant handle nearly as much pressure as rem. I was blowing primers in noslers in loads that I used to fireform the rem brass with.

Nosler failed after 10 shots I believe, but he found nosler gave the best velocity std dev. and best accuracy. Go figure.

Its justa mag article but found it interesting, that this guy litterly shot 2000 rounds for the article and did such in depth research. Its the most research I have ever seen done on an article.

All times are GMT -8. The time now is 03:17 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page