Load data
 

How often should the load data books be updated that you use? I was looking at gunbroker and a guy is selling caliber specific load data books, i.e. 7mm-08 and .30-06 but publish date is 1995. Pretty much was wondering whould this info still be pretty good or has powders/primers etc changed too severely in that 12 yrs?

RE: Load data
 

There have beenquite a lot ofpowder & bulletchanges and additions since 1995, so yeah, I'd say it's a little dated.
Since 1997, a lot of new factory cartridges started hitting the market: 260 Rem, 204 Ruger,WSM's, WSSM's,RSAUM's, Ultra Mag's, and more. New powders and bulletshave been developed that are taylored to some of these new rounds. And of course they work with older cartridges also.

RE: Load data
 

Well, any loads you get anywhere are just a quick and dirty reference guide. I know alot of people like hard rules for loads, but you can't do that. Some guns I have had with custom barrels, I could not reach max hodgdon loads without pressure signs. And some guns, I have went well past max loads maybe 2 grains or so with no pressure signs. Those load books are ok butage is not the issue but validity of the data. But if it was me, I would buy several sources from bullet and powder mfg. to make my decision.

What I do when loading a new wieght, is get out all my sources, Sierra, Nosler, Lyman, HornadySpeer, IMR, Hodgdon, Alliant, etc. I write down all the max loads, and applicable powders. and make a decision from there. I give a powder a try. I won't hesitate to move slowly past max load if I see promising results. Just move slowly.

RE: Load data
 

Pretty much what I thought. There is a few manuals from last yr though so I got them bookmarked to watch. I am slowly gathering things together to get started well.
On a side note, can anyone give me a rough estimate on how many reloads I can exspect from say 1 lb. of IMR4350 using .30-06 cases? Graf's
has some but that HazMat charge will start to eat u alive if not careful shopping! [:-]

RE: Load data
 

I did a search on pounds to grains conversions using 53 grs of IMR 4350 (thats what load I use) and the math says ~327 loads @53gr out of a pound.

RE: Load data
 

More like 127 loads. Pal, I don't know what math they teach you at t-town high, but its differnet than the rest of the world.[:-][8D]

7000grains= 1lb
7000/53=132

I would be conservative, since I put alot on the floor sometime and call it 130 loads from 1lb of powder.

RE: Load data
 

RE: Load data
 

See, Mossy deserves this lashing. Every time I hang with him, I get a English lesson. He says Ten (10), like one would say tan, but differently. I pronounce it like I was tought by my grade school teacher like "tin". He says the word "our", like hour on a clock. I pronounce it the correct way, like "err".

RE: Load data
 

First off, I was just quoting what the web conversion said I dunno Ive never been through an entire pound for one specific cartridge.....second off I correct your speach because you speak like some creature in the bar from the movie Star Wars. :D I say pen andten like its supposed to sound, you say pen like its spelled pin. And our IS pronounced like hour on a clock......of course I couldnt expect someone from Kentucky to understand correct English, you speak Appalachian American :D:D

RE: Load data
 

It's a code I tell ya, it's a code!:D:D