Restoring a Rusty Remington
How is that for alliteration?
I have way too many shotguns and definitely wasn't looking for another one, but what can I say? My Father in law picked this project up for me at a yard sale for $40. It is a Remington model 58 12 gauge semi-auto, made in 1956, the walnut looks pretty good but the metal has pink rust spots. anyway, here is what it looked like when he brought it to me: |
Dis-assembly, the trigger group is removed just like any other Remington 870/1100, just push out the two pins.
The stock had two holes, one for the bolt and the other for??? In this picture you can see the action bar where it attaches to the piston (which is mounted in the front portion of the magazine, which is why the magazine only holds two rounds. The trigger housing is aluminum and the finish looks horrible, since I have not tried anodizing yet and a polished housing would look good on this gun, I decided to strip and polish it OK now what? I guess I need to take this mess of parts and make a working trigger mechanism out of them |
While I was at it I polished some of the other parts
I also polished the bearing surfaces of the hammer After much cursing, dis-assembly and reassembly I finally have a working trigger mechanism now on to the steel |
The next step was to remove the rust and old bluing using naval jelly
I then remove the remaining bluing along with the acid "etching" with the wire wheel on my grinder Then we start removing the pits, starting with 120 grit emory cloth, then moving to 220 grit sand paper I kept moving up on the grit until I got to 2000 grit (wet/dry) sand paper, the metal is almost ready for bluing I then went to work on the barrel, there was a large rust pit on the magazine ring, I used a file to get it smooth again then I sanded the barrel to 600 grit and used the buffer to make it shine, the black stuff on the metal is buffing compound |
When I blue a gun, I do more than one, more economical that way
Done! I also jeweled the bolt and nitre blued the pins and charging handle Before & After you can see the whole story here: http://tincanbandit.blogspot.com/201...-model_10.html |
Excellent work !!!
Thanks for posting ! |
Nice job of restoration.
|
Very nice job. Did you blue it yourself or have it done?
|
Originally Posted by RPD63
(Post 4221378)
Very nice job. Did you blue it yourself or have it done?
|
I liked the idea of polishing the crud off they used to "blue" that trigger guard and leaving it bare polished. Very nice detail.
|
Sweet work!
|
Great job, congratulations.
|
Originally Posted by super_hunt54
(Post 4221856)
I liked the idea of polishing the crud off they used to "blue" that trigger guard and leaving it bare polished. Very nice detail.
|
Very nice job!
|
I've seen some of your other posts with guns you have restored, you do great work, congratulations.
|
Very awesome! Good work!!!
|
Originally Posted by super_hunt54
(Post 4221856)
I liked the idea of polishing the crud off they used to "blue" that trigger guard and leaving it bare polished. Very nice detail.
Check these guys out, they have some pretty vivid colors http://www.guncandy.net/images.html |
Very nice.Did you hot or cold blue and could you describe your bluin process?
|
All times are GMT -8. The time now is 01:14 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.