HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Guns (https://www.huntingnet.com/forum/guns-10/)
-   -   Winchester 70 or Remington 700? (https://www.huntingnet.com/forum/guns/6217-winchester-70-remington-700-a.html)

Dougk 02-21-2002 11:15 AM

Winchester 70 or Remington 700?
 
Which one do you prefer and why? Which one has greater accuracy out of the box? Thanks

Deleted User 02-21-2002 01:24 PM

[Deleted]
 
[Deleted by Admins]

JagMagMan 02-21-2002 05:40 PM

RE: Winchester 70 or Remington 700?
 
Winchester M70! They are just great guns!

stubblejumper 02-21-2002 06:10 PM

RE: Winchester 70 or Remington 700?
 
I have had the best luck with 700's and use these actions for all my custom rifles.

Deleted User 02-21-2002 07:04 PM

[Deleted]
 
[Deleted by Admins]

PABuck_HNTR 02-21-2002 07:09 PM

RE: Winchester 70 or Remington 700?
 
Flip a Coin, I have both and one is not any better than the other out of box. I have to agree on Win 70 safety though, I do like it better.

halcon 02-22-2002 12:49 AM

RE: Winchester 70 or Remington 700?
 
I own both and accuracy is about the same in my opinion .I used to prefer the model 70 ,but now its a toss-up .

Deleted User 02-22-2002 03:47 AM

[Deleted]
 
[Deleted by Admins]

eldeguello 02-22-2002 07:38 PM

RE: Winchester 70 or Remington 700?
 
My first bolt-action centerfire rifle was an M721 Remington, predecessor to the M700. The reason was, I could not afford the extra $35.00 for an M70 Winchester. I still feel the same way today.

Larry

Big Earl 02-22-2002 08:58 PM

RE: Winchester 70 or Remington 700?
 
Winchester: Steel bottom metal - Controled round action- Massive claw extractor - hand rubbed stock - Direct firing pin blocking safty - simple compound lever trigger - Field strippablebolt. Remington: Plastic bottom metal - Non controled action - flimsy pressed sheet metal extractor - Plastic sprayed on finish -Safty built into sheet metal trigger -trigger does tripple duty,also a bolt stop and a safty Non field strippable bolt. Requires a special tool. I like remington but they have cut so many corners that I almost always take Winchester hunting with me. Dont like taking chances with second best. (I and two friends have had trouble with new remington plunger ejectors sticking)


PABuck_HNTR 02-23-2002 08:08 AM

RE: Winchester 70 or Remington 700?
 
My Remington doesn't fit that description, Ed

Ruger-Redhawk 02-23-2002 09:27 AM

RE: Winchester 70 or Remington 700?
 
Big Earl, sounds like you are discribing the Remington Model 710.I've always liked the Rem 700. But from hearing all the problems with Remington lately. I think I would have to go with the Winchester M-70. Better still the Ruger M-77. Ruger Redhawk

Colo Wolf 02-24-2002 08:43 AM

RE: Winchester 70 or Remington 700?
 
I have shot the rem, the push feed win 70 and the new classic win 70. All three are good actions, I like the trigger adjustment onthe 700 best and can really smooth it up . But for the best overall action , the mdl 70 classic wins for me. Its extraction, bullet pickup, excellent smooth bolt movment and lock up, all the way thru, its just the perfect setup, and even the trigger group can be tuned easily.

mike bell 02-24-2002 12:03 PM

RE: Winchester 70 or Remington 700?
 
I'll tell you what my instructor at Gunsmithing school told me. (Former head of the Army Markmanship unit at Ft. Benning)

Rem bolts are silver sodered on and the Win. 70 is forged. Accuracy is almost the same, depending on the riflesmith working on it.

diyj98 02-25-2002 12:41 PM

RE: Winchester 70 or Remington 700?
 
Both are fine guns, but I prefer the Model 70. I like the safety better plus I prefer the controlled round feeding. Plus the trigger is much easier to work on.


All times are GMT -8. The time now is 06:04 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.