I know its in a different league, but why not a 243 win?

yes it is a small world i didnt take any pictures yet and im working in washington right now. i know will took sum i will see if he still has them. i guess i gonna have to learn more about guns besideds shooting them so i can talk intelligent on here but that what Will is for.DID WILL SHOW U THE GUN THAT FIBER METAL STOCK PIANT JOB IS COOL HE HAD DUN

I have a 243wssm he built me and i was wanting a true varmit gun and i was told this is the best vs a 22-250 and it is one sweet shooter the guy that put it together for me is a good freind he is the gun master im just a shooter he told me the pros and cons of the 2 so it became a 6mmbr best part about the gun i luv it has a 20 imch barrel i luv that its so short

Yep, I saw that one. When you get home take a good pic and post it. I think that is one sharp looking rifle. I think you'll have a ton of fun with it

hi fellas, i'm new to THIS site. i learned about it from gunnermlr and joemontana. guess i'm the lucky guy who gets to build guns for others to enjoy. the one gun i did for joemotana is a 6mm br. the specs are as follows;

Bat vr action
kreiger 14tw ss fluted 19" long
hs precision model 7 varmit stock
(filled in and reinletted for the Bat action)
(the stock is then dipped in a custom carbon fiber)
ss rem trigger set at 1 1/2 lbs
rw hart custom one peice base and rings
leupold 6.5 x 20 efr target scope
lapua brass
nosler 55gr bt
varget powder (vel. 3540fps)
shoots low .2s ,if you do your part

both gunnermlr and i use the 6 br's for benchrest comp. with the heavier 105s and 108 bergers going high 2700 to low 2900,the perform quit well from 200yrds out to 1000. they are fun to shoot, with a lot less recoil the 6.5s and larger cal. i'll try to figure out how to post a pic enjoy

Yea post some pics, I have a 100% carbon fiber stock but it would be much cheaper to get one dipped for the look!!

You can always PM me for my e-mail then I can post the pics for you...but if you have a photobucket its super simple to post them here...

Attachment 15946

this is the only pic i have ,sorry, it's nearly done at this stage. click on pic and zoom to see the carbon fiber on the stock

jeepkid, we've used the kevler pounder stocks from brown precision before, nice and light but a pain in the backside to work with. the place that does the dipping for me is called liquid illusions here in pa. they do very good work, they've done qiute a few stock for us.

I like the look of it! What do they charge?

Heres mine, its a Manners MCS-T

jeepkid, for hunting stock, it's $95. you can get semi gloss or high gloss. talk to kevin, they have lots of diff patters to choose from


http://liquidillusion.net/pattern.html